I am able to connect to the net with just the modem and an ethernet cable. However, I have trouble switching to a wireless connection with a wireless router. The PC detects the NETGEAR wireless network and is able to connect to it. I am also able to access the router configuration page (192.168.0.1)but that's all it can do. On the router configuration page (192.168.0.1), when I click on the "router status" it says that it is "trying to connect to server". I have gone through netgear's troubleshooting help but nothing seems to work. Thanks in advance to anyone who can offer any kind of help.
Hi I am Deepak And Will make sure that Your Wireless connection goes great . Your router is wgr614 .. Depending on the model that whether it is v5 or v6 . you have to make sure that wireless option should be selected , which is advance wireless setting's: make sure that atleast for the time being there should be no mac filtering or wep/wpa enabeled on router : then do the power cycle of network . again make sure that on computer no firewall or anti virus is enabeled. if this does not works then hard reset the router and reconfigure it again .
Posted on Jan 27, 2007
This is your router trying to connect to the modem, ensure that the routers wireless connection is enabled and see if your router when you access it is giving your pc an ip address. Make sure DHCP is enabled for automatic ip address allocation. Run this programme, click Start>run then type ipconfig /flushdns then press enter. This will flush any old addresses given by the modem.
Posted on Jan 27, 2007
you might have a modem with an ethernet connection to connect to the net .
if you have a laptop you can choose a wireless usb broadband modem which can work on a desktop also once you recieve the modem just insert the modem into a usb port and follow the prompts you might need some drivers for the usb broadband modem which can be supplied by the ISP internet provider
hope this helps
91 views
Usually answered in minutes!
×