Error 093-952 Crum Error - Xerox Phaser 6180N Laser Printer

http://printcopy.info/?l=en&mod=erc&brand=Sharp&model=AR5623N&code=F2%2070

Sharp AR5623N Error Codes

Sharp AR5623N Error Codes Code: All codes CH Blink CH ON E7 01 E7 02 E7 06 E7 10 E7 11 E7 16 F2 40 F2 64 F2 70 F2 74 H3 00 H3 01 H4 00 H5 01 L1 00 L3 00 L4 01 L4 31 L4 32 L6 10 U2 04 U2 11 U2 12

Code

F2 70

Description

•Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark code of the CRUM differs. •The company code of the CRUM differs. •The boot program model code does not coincide with the CRUM model code. •When the CRUM type is other than genuine/ conversion/production rotation. •The machine destination differs from the CRUM destination.

Causes

CRUM chip defect Improper toner cartridge.

Remedy

Replace the toner cartridge.

F2 04 Content Improper cartridge (Destination error, life cycle
error)
Detail The destination of the machine differs from that
of the CRUM.
The life cycle information is other than "Not
used (FFh)."
Cause CRUM chip defect
Improper developing unit
Check
and
remedy
Replace the CRUM chip.
Replace the developing unit.
Identificat
ion error
The trade mark code of the CRUM differs.
The company code of the CRUM differs.
Model
error
The boot program model code does not
coincide with the CRUM model code.
Type error When the CRUM type is other than genuine/
conversion/production rotation.
Destinatio
n error
The machine destination differs from the
CRUM destination.
Data
abnormali
ty
When an error value is included in the initial
check information. When the max. toner supply
time is 00.
When the print hard stop is 00.
Misc error When the Misc information is other than "Not
used (FFh)

093-950 Y - CRUM Error
Error 093-950
Restart Printer

The yellow toner Smart Chip error is detected

Error with detecting or defective yellow toner cartridge. Replacing cartridge should correct it.
Paul

F2 - 04 : Improper cartridge (Destination error, life cycle error)

Detail : The destination of the machine differs from that of the CRUM.
The life cycle information is other than "Not used (FFh)."

Cause : CRUM chip defect - Improper developing unit
Check and remedy : Replace the CRUM chip - Replace the developing unit.

Identificat ion error : The trade mark code of the CRUM differs.
The company code of the CRUM differs.

Model error : The boot program model code does not coincide with the CRUM model code.

Type error : When the CRUM type is other than genuine/conversion/production rotation .

Destination error : The machine destination differs from the CRUM destination.

Data abnormality : When an error value is included in the initial

check information. When the max. toner supply time is 00.
When the print hard stop is 00.

Misc error : When the Misc information is other than "Not used (FFh)."

009-367:The Yellow (Y) Toner Cartridge CRUM Data error is detected.

1. Cycle power on the Printer.
   1. Turn the printer off.
   2. Wait 10 seconds.
   3. Turn the printer on.
   4. Determine if the issue still occurs.
      
      
2. Verify that the toner installed is Dell toner

1. Cycle power on the printer again.
   
   
2. If the error persists, replace the desired toner cartridge.
   • If the desired toner cartridge has already been replaced, replace the Toner Dispenser CRUM.
   • If the Toner Dispenser CRUM has already been replaced, replace the Printer.

U2-40 Content CRUM chip communication error.

Detail
An error occurs during communication
between the MCU and the CRUM chip.

Cause
CRUM chip abnormality.
Developing unit disconnection.
MCU PWB abnormality.

Check and remedy
Replace the chip.
Check installation of the developing unit.


Use SIM 16 to cancel the trouble.
Replace the MCU PWB.

Clear the trouble with SIM 16.

Content CRUM chip communication error
Details Error in MCU-CRUM chip communication
Cause CRUM chip failure
Developing unit contact trouble
MCU PWB failure
Check
and
remedy
Replace the CRUM chip.
Check installation of the developing unit.

Replace the MCU PWB.
Remarks CRUM communication error

U2-40 CRUM communication error

Detail-Toner cartridge CRUM data read
error

Cause-A toner cartridge of a different
destination is installed.
EEPROM trouble
Check the destination setup.
Toner cartridge CRUM PWB trouble
MCU PWB trouble
CRUM connector disconnection

Check and
remedy- Install a specified toner cartridge.
Check the SIM 26-6 setup.
Replace the EEPROM.
Replace the toner cartridge.
Replace the MCU PWB.
Check connection of the CRUM
connector.
Execute SIM 16.

please help with diagnosis of following error for Dell 5110CN CRUM ID -093-665
I tried everyting. I took the imaging drum out and poot it in, and notihng. This imaging drum worded before OK.

Tom