Need help on setting the date and time when you record it into dvd.

Please install the driver first on your PC then paired them. Please get your driver here : www.sony.com/ www.nodevice.com/driver/company/SONY.html www.sony.co.id/support/faq/132345

get another cheap pc with xp

Hi
Try a miniDV tape cleaning cassette

CCD not good,you bay new

Only way is Play burned DVD in dvd player and provide Audio- Video out (yellow-red-white) to mini DV camera that has AV Line Input recording facility. Or find any Mini DV recorder and record tape.
In that way you can record video again on Mini DV tape.

Hi there,

Firstly you need the remote control that came with your camera (RMT-814).

Switch on your camera to VCR mode. Then on the remote, press the Data Code button (and of course, point the remote towards your camera). This should display the date and time in the bottom left of the screen.

It should display the appropriate date and time for each bit of recorded video.

Hope this helps!


Ron.

Here's were you need to go and updated the picture package version that you have.
http://www.ppackage.com/e/index.html

the flexwire of the lcd monitor of your camera is already cut.....it have to repair or replace now cause that wire is very small and only skilled technician can repaired it...lot of our customer it is the common problem of there camera that why in our shop we modified that and became more durable than the original wire....

Check the camera's menu, it may be set improperly. Beyond that, I'd get in touch with Sony (see their website first).

Possibble cause can be the broken flat cable between LCD and Main board. Regards, Arpi