Question about Canon ES10V Camcorder

1 Answer

Lcd viewer when i open the lcd viewer more than a quarter of an inch the screen goes blank ..and shuts down the camera

Posted by marvin scott on

  • marvin scott Jan 27, 2007

    thanks for the response,at least i know what i am dealing with and i will try to get it fixed locally

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

Probably the ribbon cable that connects the LCD to the camcorder is cracked or getting pinched somehow.

Posted on Jan 27, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuji FinePix S9500 has a blank viewer & lcd screen, it has powered up but nothing is being displayed in either.

This took me a bit, in fact I needed to got to one of my Fujifilm cameras to see if I could duplicate what I was thinking the problem could be. So here goes. There is a small button on the back body just off the lower right side of the LCD screen it has Disp/Back written on it. What I'm saying is that this button has been pushed to give a blank screen which will affect both the viewfinder and the LCD. To get to that point I had the camera in Manual mode ISO at 100 and the lens cap on. The aperture was set for F9 and the shutter at 1/60th. My camera has a "shake" icon so in Auto and program there was the shake icon on the LCD screen it also showed in the "A" mode as well. Now that said my version of your camera may be a few models ahead, your camera may not have the camera shake feature or icon. In short I think you have pressed the "Disp/Back" button and changed the view mode.
0helpful
1answer

Screen goes blank.Shut it down and retsart and it works OK for mi

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed HP monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net
3helpful
2answers

Monitor goes blank after it comes on for two seconds

bad capacitors on the power board internal to the monitor they need to be replaced, let me know what you would like to do
0helpful
1answer

Blue screen

the video ribbon is probably not secure in its connector and as you open the door it is pulled from the simple housing it connects to these cameras are absolutely terrible the lcd screens will always fail because of a design defect in the ribbon and its routing and fastening.Inside the lcd screen to secure it they use electrical tape as a fastener so ridiculous.
1helpful
1answer
0helpful
2answers

Mini dv camcorder

CCD sensor failure . Shortly you will have only blank screen in capture mode. Should be replaced by your agent free of charge.
2helpful
1answer

BLANK LCD SCREEN

The shutter in the lens is stuck closed. You need to take the camera to a shop where they will replace the lens assembly.
0helpful
1answer

Fuji Finepix split screen

If the picture taken from digicam are ok when viewed from a computer, the lcd viewer has a loose connection or defective already, if you can open your unit, try to disconnect and reconnect the lcd flexwire inside.
Not finding what you are looking for?
Canon ES10V Camcorder Logo

Related Topics:

108 views

Ask a Question

Usually answered in minutes!

Top Canon Video Cameras Experts

Brad Brown

Level 3 Expert

18856 Answers

NOEL
NOEL

Level 3 Expert

8555 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2028 Answers

Are you a Canon Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...