RCA F27664 27" TV Logo

Related Topics:

Question about RCA F27664 27" TV

2 Answers

TV Clicks on over and over

When I hit the power button (Remote or TV) The TV clicks on about four times and then nothing happens. RCA, F27664 Overall it has been a very good television for 6 years. Thanks Keith

Posted by Anonymous on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Oh yeh I remember this problem, well.....What you need to do is click on the ON/OFF button, then click the TV button, and it should pop on, if not then click the ON/OFF button again, that should do it. If that does not work, this model works almost like a PC and if you UNPLUG it from the wall while its on, and wait 2 minutes, it should all reset when you turn it on again. Good luck....

Posted on Apr 22, 2008

Ad

Simpson Neal

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

When you get this "click" it is the power supply trying to start. This indicates a short somewhere. Most of the time it is the horizontal output transistor and probably the flyback transformer that have shorted. Stargazer

Posted on Feb 04, 2007

Ad

1 Related Answer

Anonymous

  • 119 Answers

SOURCE: TV Clicks on but does not start

sound like you have a bad capacitor in the horizontal deflection circuit check c14406 & c14402. each part is about $10.00. + you local shop rate. good luck.

Posted on Jan 30, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Emersin tv

which Dish Network system do u have. If it is the Hopper they program a little easier that the others. but if you have anything other than the hopper u do this. #1 turn onTV,#1 take Dish Remote,#3 press and hold down the TV button on top of the remote, hold it till all four lights light up.#4 press the small red TV button,# now press and click the channel Up or Down , do this one click at a time , (do not just press and hold ) this may take 200 clicks so don't give up. #5 when the TV goes off u quickly press the #(pound button) located on the bottom right of the remote. the TV button on top should flash 3 times. Now try to turn the TV back on.Ok now if you are clicking the channel button too fast and the TV turns off and u pass it up no sweat,,just hit the # button anyway.. and start from the beginning again, but this time use the OTHER channel button the TV should turn off within a couple of clicks. (that saves you from having to hit the button another 100 tries.. ha good luck
0helpful
1answer

Philips 52pfl5704 no screen image

Sounds like main board fault. Contact the authorized service center for Philips. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
5helpful
1answer

TV won't turn on, standby LED starts blinking

HI, this is the result of an unstable power sector in this unit. the fly back is malfunctioning and, you will need to replace it asap. i will list the part number below and a link to a site as well. you can purchase this part on-line if you wish.

FBT ASSY NX-4521//X4
Sony Part Number: 1-453-310-11

CLICK HERE TO ORDER
0helpful
1answer

My RCA model D52W20 will not fully power on when we try to turn it on by using the power button on the tv or by using a remote. There is a click and the green light that shows power lights but the tv does...

unfortunatly the rca d52w20 is a flawed tv, they a high rate of problems with the power supply and convergence amps, both parts are no longer available, i have scrapped those sets that were barley a year and a half old. sorry and good luck
12helpful
3answers

Insignia TV code for RCA Universial Remote Control (RCR450)

If its a four digit code remote. I may be able to help.. Try these...0171, 1204, 1326, 1517, 1963, 2002..
Good luck
0helpful
1answer

RCA model# F26071ES television set clicks on, then immediately off when using power button on TV or by using remote.

This should help you.. use the TV button on the remote instead of the power button. If the TV is working properly and the buttons aren't damaged this should do it.
I know mine clicks off as well.. unless I use the TV button to turn it on.

Chey60
1helpful
1answer

Philips TV/DVD

Hi, EASY :) just a few clicks on Google...... Turn the TV on, press the number 9 on the remote four times (9999) an then press MENU button on the remote too. Thtas all folks !, Sorry for my bad English but I'm from Spain :)

Good luck ;)
0helpful
1answer

My RCA D52W20 will not stay on

Clicking sound is power relay engaging. If all systems are not functioning properly, unit will shut down to prevent further damage and/or fire hazard
0helpful
1answer

TV Clicks on but does not start

sound like you have a bad capacitor in the horizontal deflection circuit check c14406 & c14402. each part is about $10.00. + you local shop rate. good luck.
Not finding what you are looking for?

87 views

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76835 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Cindy Wells

Level 3 Expert

6447 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...