At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My t.v need to unplugged and plug repetedly before i...
This problem is in side of smps pls. check and replace output voltage capacitor cap: 100uf/450v / 470uf/50v, 220uf/50v ect,,,it is a normal problem 3 or 4 year's old lcdtv
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the adjustment dial , they are usually dirty from accumulated dust . at any auto parts store you can purchase a can of electrasol , unplug unit , spray into the middle of the switch, as you turn the switch, rapidly all the way around in both directions , repete this .. 2--3 times . look if possible, at the connections on the back of switch are clean ,and have good contact ... let device dry completely before plugging it back in and turning unit on.. let me know , good luck StevenT...
Try cleaning out the paper and debris out of the shreader and empty the waste container. Get some cooking oil and oil the blades in a right to left application format. turn it on to circulate the lubrication and turn it off and repete until all blades are coated. Then unplug it from the wall press and hold the power button for sixty seconds and then plug it back in. Test it to see if that solves your issue.
Mine does the same. It's not turning off though, it's just blacked out. The only way to fix this is by leaving it on whilst blacked out and about 10-20 minutes later if you turn it on and back on the picture should show up. Mine's been doing it for some time so it takes longer. :(
there is short circuit in motherboard if your adater have small led and if LED off when you inseting power jack that means short circuit in dc to dc controller or VRM section on your motherboard
Hi,
1.u can uninstall the cartridges
2.take the power cable out from the back of the printer
3.press and hold "#" & "6" key while the power cable is out
4.while pressing both the keys plug the power cable in and try to connect the printer directly to wall outlet
5.release both the keys, u will see ur printer will turn on automatically, if it does not press the power botton and turn it on , then it ask for the language press 11
6.ur printer will start making noise so do not worry abt that and it will ask for the cartridges,
7.install the cartridges
8.when u get ur normal screen of the printer then check the performance
Reply with the correct model number. "Pro 155" designates a series. We need to know whether you have a heater with a spark plug or a heater with an ignitor (glowbar).
That is usually a bad main board. You can try removing the memory and reinstalling it...that fixes the problem sometimes. Also unplug your network cable and turn it on...data present when turning on some xerox models will cause problems.
You are missing 15volts. If this is a new TV, it could be as simple as a plug not fully seated on the power supply. Regardless, the repair should be covered by warranty and Panasonic is one of the best when it comes to taking care of the customer. Ifd nI can be of further assistance, let me know
×