SOURCE: Camcorder shows condensation problem most of the time
Its a possibility that the sensor could be bad but I'll bet that its a small surface mounted capacitor thats bad. These are common for the caps to go bad, and when they do start to leak, the camcorder should be taken into the shop asap, AS THE LONGER YOU WAIT THE MORE DAMAGE the Capacitors will cause, as they eat up the tiny traces on the board and then the board has to be replaced. Good Luck
SOURCE: Sony HVR-A1P condensation warning
dnt do it bcos u will nt be able to reach the dew sensor as ur nt a proffesional so,
just keep the camcorderi9n stand by mode and keep it in front of ac or so..
SOURCE: HVR-Z1E Capture problem
Hi George, Sounds like you and I are of the same level with this Cam and editing , would love to compare notes with you if you would care to drop me a line [email protected]
Pat
SOURCE: Hi, I need a replacement Firewire port for my
Hi,
Can you tell me what board is written on it, like its JK board or JS board etc.
I have service manual of this camcorder and will provide you part number info, just let me know board name/ number.
Thanks.
SOURCE: Sony camcorder HDV 1080i model HVR A1U won't eject
Sony A1U stopped functioning. Neither AC power or battery yields anything. Reset button yields brief flash only. Tape stuck in machine. Help?
91 views
Usually answered in minutes!
×