Maclaren Twin Traveller - Carbon/Crimson Umbrella Stroller Logo

Question about Maclaren Twin Traveller - Carbon/Crimson Umbrella Stroller

1 Answer

Maclaren Twin Traveller Seat Problem

One of the seats on my stroller will no longer stay in the upright position on the recline settings. I cannot tell whether something inside of the recline mechanism has snapped, whether there is a problem with one of the springs, etc.

Posted by Eve Reed on

  • 1 more comment 
  • Anonymous Oct 16, 2008

    Neither of the seats stay up. The previous owner took to using string!

  • Anonymous Mar 20, 2014

    where to buy a replacement

  • Anonymous Mar 29, 2014

    I cannot figure out how to raise the seat of my jeep liberty terrain stroller so my son can play with the steering wheel when riding. I cannot get it out of the reclining position


1 Answer


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I purchased my stroller from ebay and one side of one seat would not stay in place it would only stay in the fully reclined position. I took it to a maclaren autorized stoller repair store and it was $37.28 to fix one bracket.

Posted on Oct 27, 2007

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Seat wont stay upright, now keeps reclining

Hi Sam,

We would recommend you contact Silver Cross directly for assistance

Change the position from recline

Hi Claire

Stand in front of the Buzz chassis at the front wheel. On either side of the seat unit you have a grey button. Push the button down and now you recline the seat / sit it upright as required.

Does anyone know how to sit a maclaren triumph buggy in a more upright position.

YES! I solved this easily. At the back of the seat where the recline webbing straps are, there are two ends that have male end snaps on them that have female end snaps that are on the back square tubing of the frame. Simply undo those from the frame and add an extra male snap end about 3 1/4 to 3 1/2 inches (on center) down that strap so it can snap into itself. Then it is simple to wrap these around the upper round tubing, just over the bracket for the hood, and snap it back to itself on each side. Presto! It now sits more upright and all that was needed to do was to add that female snap end onto each of those loose straps. You can now even adjust the recline easier (with the snaps still on) or for a full recline, simply unsnap those straps and unbuckle the back and they are now nearly flat.

Double hood?


The best way to get parts for the Maclaren is contacting factory.

Please open the page below, select your region and country, and use the Customer Service> Contact link at the bottom of the page to contact Maclaren.

Here the web site.



How to fold a beby trend expedition single

• Close the canopy as described in the canopy section. Recline seat by releasing buckle as described in seatback positioning section.
• The stroller is folded by simultaneously pulling each trigger fold. . When the fold latches are released, the handle will begin to fall toward the floor. Release the fold buttons and press downward on the stroller handle until the stroller is completely folded. Secure the stroller in the folded position by hooking the fold latch, located on the right side of the stroller, over the rivet that protrudes from the frame.
* The canopy features a ratchet system that allows the canopy to be moved forward to block the sun or wind. To adjust the canopy’s position, push forward or backward on the canopy until the canopy is in the desired position. See figure 23.
* The seat has a multiple position recline that is controlled by a strap and buckle assembly behind the seat. . To recline the seat, loosen the strap through the buckle and adjust to the required recline position. To place the seat back in the upright position, press upward on the seat back with one hand while pulling the strap through the buckle with the other. The strap will lock automatically.

Maclaren double stroller canopy

I need a double canopy for a black twin traveller maclaren

Cosatto duo traveller in slate

on this style of prame the front seat does not recline only the back one does.

Need to recline seat

On the back of the the seat back is a plastic tab connecting two lanyards/cords. These cords are used to adjust the seatback angle from the recline to full up-right position.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Maclaren Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

153 Answers

xxxxxx xxx

Level 3 Expert

5102 Answers

Paul Carew

Level 3 Expert

3763 Answers

Are you a Maclaren Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides