Cant watch any sky channels

If your Sky Plus box is not allowing you to record one channel while watching another and is displaying a "no signal" error, there could be a few potential causes for this issue:

Insufficient signal strength: Make sure that your Sky Plus box is connected to the satellite dish correctly and that the dish is pointing in the correct direction. Weak signal strength can prevent the box from tuning in to channels properly.

Dish misalignment: If your dish is not properly aligned, it may not be able to pick up a signal from the satellite. You can try adjusting the dish yourself or contact a professional to align it for you.

Technical problem with the box: There may be a technical problem with your Sky Plus box that is preventing it from recording and watching different channels at the same time. This can be caused by a hardware malfunction or a software issue.

Subscription issue: Make sure you have the appropriate subscription package that allows you to record and watch different channels at the same time.

Box is full: If your hard disk is full, the sky+ box may not be able to record or watch another channel.

It would be best to check all the above points, if the problem persists, contact Sky customer service for further assistance.
Why is my Sky saying no signal on some channels?

Faulty Satellite Cable
There are all sorts of things that can cause a cable to become faulty like age, condition, and whether it's damaged and weathering/ water ingress. To fix- A new coaxial cable or two new coaxial cables may need to be installed for Sky+ boxes and Sky Q boxes.

hello bra mare sky im a820l ka full sortware finsh ho ga hia help me

Hi sounds like the remote may be in the wrong mode , you can scan channels into the sky box or the TV/combo.
Make sure you are scanning them into the box not the combo.

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

Sky Sports is now an encrypted subscription service and no longer free to air. Your only legal fix is to purchase a subscription. I'm sure you'll understand that FixYa cannot offer assistance with any illegal means of accessing the service.

I cannot advise you regarding the other channels as you haven't said which ones. But the same principles apply as above.

Sounds like the "channel" you are trying to watch on is not the one it's plugged into, or a faulty lead.
check the connection from the sky box to the tv, and select the av or hdmi channel that it is plugged into on the tv.
check the lead by swapping it for a known good one, for example from a dvd or ps3, but unplug from the dvd/ps3 and plug into the sky box(make sure that all the units are powered off when swapping leads) and try on the channel you normally watch/use the dvd/ps3.
If you suspect the sky is at fault, press menu on the sky remote and then flick through all the av/hdmi channels until you find the menu, then try to reinstall/retune the sky box.
If that don't work phone sky......................

My watch keeps stopping, I keep winding it every morning to adjust the time then it works for a day.what could the problem be?

try tuning tv in another room, if it works it is then your cable or socket, try the cable next. If it wont tune its a faulty set.

I believe that the Humax can only output 1 channel and because it has no built in hdd and twin channel capabilty that is all you can record 1 channel (unlike sky +/sky HD) so that means also that unless you watch a different source (like the picture from your aerial (terrestial channels)) you are stuck with having to watch the channel you record

Hi there! Sorry but you can't unless you have My Sky/HD recorder. The sky decoder is simply a one channel watch decoder. You can only record a sky channel and watch the channels normally provided via your VHF and UHF aerials connected to the decoder or vice versa.
My Sky fixes that although you cannot record to a dvd disc on this thing and the privilege comes at a price of course!

no-not the tv try buying another remote from the manufacturer and that will solve the problem