Veo Web observer Question

If you have a google account, you WILL have a password but may have forgotten it. If you have forgotten your password, click the "Need Help?" link below the logon box and proceed to the password recovery/reset procedure.

Windows Password Unlocker can help you reset forgotten Windows local administrator, domain administrator and other user account passwords on Windows 8/7/Vista/XP/2008/ 2003/2000.

If you have forgotten your login password:

Perform a Linksys reset

The easiest method of resetting your Linksys router's password is to reset your router back to the default factory settings. This is done by simply holding down the reset button located on the back of the unit for at least 30 seconds. Once the router has been reset, it must be reconfigured. Using your web browser go to URL address http://192.168.1.1. You will then be prompted to login to your router. A log-in screen asking for the password will automatically appear. At this time enter the default password "admin", in lower case letters into the password field. The username field may be left blank at this time. (Note: both the default username and default password are set to "admin" on some of the newer Linksys router models).

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

If there is username and password boxes on the logon page, you have no choice to login without the correct password. If you've forgotten the password, then follow the instructions on how to reset your password. There must be "Forgot your password" or similar options on the same screen.
If you need further help, let me know with more details including the name of the website.

Good Luck.

Thanks for using FixYa.

Push the blue Veo button on the front of the camera to turn it "OFF". Wait a minute and push it again to turn it "ON". This will reset the camera to the default settings: user; admin; password: password.

You can create a Windows password reset disk to reset your lost or forgotten Windows password, i have created one with the tool Windows Password Breaker and reset my administrator password successfully.

If you've forgotten the Router password, then press the Router Reset button (a small point) located next to the Ethernet port on the Router to restore the Router to factory settings.
After resetting the Router to factory defaults, use the default name and password.

Router Login: http://192.168.1.1
Login Name: admin
Login Password: password

Hit the ALT key and F4 while auto logon is counting down to cancel auto logon.

If you've forgotten the admin password you can perform a factory reset by holding down the 'G' key while powering the device on.

try to boot in safe mode and remove the password

username : admin
password : password

to reset it to factory default, press power button for 6secs, and you should see the number chagne to 300, then you can release the power button, the observer should turn off, when you turn it on again, it should now be back to the factory default settings