Turn your unit off by pressing the SRC button. then press the clock button (clock appears). press the audio (or function button) and then the hour blinks. press up or down to change setting and left or right to switch from hours to minutes. press audio button. wallah!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Refer to the section of your owner's manual that addresses the car radio. Each car radio is different in the way you set the clock. If you've installed a car radio other than the one that was manufactured with the car, consult the manual for that radio.
Know that if this is the first time you're setting the clock or are setting the clock after installing a new battery in your car, you have to set the hour and the minute of time. Often, you set the clock with either the radio station up or down arrows. On some car stereos, you use the CD track selector buttons for setting the clock.
Using either the CD or radio selector buttons, set the hour first. Push the button labeled "Set" or "Clock" and then set the minute with the same procedure. When setting the minute, some manufacturers allow you to move through in increments of five by pressing and holding the button. If the time of day were 2:49 p.m., for example, you would push the button 13 times, including nine times to display :45, then four additional times incremented by one to display :49. Push the "Set" button or the "Clock" button.
Determine whether your car stereo is equipped to automatically change when Daylight Saving Time begins and ends. If it hasn't changed at 2 a.m. of the time-changing date, you know it isn't equipped for this. In that case, set the hour either forward or backward and the appropriate time of the year.
If you can't figure out how to set the clock on your car stereo, wait until noon on any given day, disconnect your car battery and reconnect it.
I don't know how my question got posted under a 1993 Chevy k1500 truck. My problem was trying to figure out how to set a clock on an aftermarket Delco loc-II am/fm cd car stereo. And NO, I still have not found my answer.
Upper right-hand corner, there's a button next to the "eject" button. Pressing this button while the unit is on will cycle between displaying the clock and the track number & play time (CD) or clock & radio station.
When the unit is off, you can press the same button to completely shut off the display, which is sometimes nice if you don't want the blue ring around the volume knob glaring in your face.
Okay, I had the same problem as well. After reading some solutions that didn't work I figured it out. On the right side of the radio there is a "F" function button on top and "A" audio button on bottom. First turn the radio off. Push the clock button until it is displayed. Then push and hold the "F" function button until the radio comes back on, then release the "F" button for a second and push it again then relase. Now, at this time the radio should only display the clock with the hour blinking. Use the up and down select key to change the time. Then push the right or left select button to change to the minute which will start blinking, then again push the up and down select button to adjust the minutes. When the time is correct just push the clock button and it is set.