How to hang my new Blender.... Actually the cord....

Part 2: Opening up the Braun handheld blender/mixer turbo 600, typ 4191.

A second phase, with the Dremel for working in the direction of the axis and splitting up the tools mounting part, also showed that no other way was available to open the machine

• And what is the question?

Part 3: Opening up the Braun handheld blender/mixer turbo 600, typ 4191.

The front end and the motor are a cast-joint part. With one more circumferential kerf, the grip-part came free, also showing that there is no other way to open the machine irreversibly.

It also showed that the contacts between the motor and the print are/were relatively loose, which amazed me for a motor of 600 Watt. And in my case: they were burnt. That explained the machine not working. It is surprising that the thermal safety didn't kick in when my wife used the machine

Blender not working,Power supply is ok.

Remove the 2 screws on the top cover with a security torax screwdriver.
The cord and switch assembly will lift out quite easily.

Solder on the new cord.
Put the cover back on.

If it is under warranty, then return it to the place you purchased it. Or call the toll free number and ask where local repair shop is. I am personally unaware of a repair shop near Cedar.

go to this page http://www.russell-hobbs.com/parts.shtml and order what you need directly from Russel Hobbs.

Please mark this answer as a fixya! thanks

Hi I'm looking for dynamic mx91. 460w
Me need shaft_ available this part
Please give me price
Thanks

no but figures you dont actually give free help.....its all about the almighty dollar..

Peace

My GF broke our Braun handheld mixer type 4191 500W, trying to mix some figs, the mixer doesn't do anything anymore. I like the mixer very much. I poked a while trying to open it and look what is wrong. This is what i found to open it. On the top, where the numbers are to adjust the speed: remove gently that lid. Below that you'll find 2e lid with the numbers on (1-5), this you can get open by pressing inside the 2 holes with 2 little screwdrivers, push these 2 black tips away and the 2e lid can be removed. Unfortunately i broke my mixer up trying. Now it's open i see how it was. Good luck guys