Sharp microwave oven LCD display malfunctions

Might or might not work. IT worked for me.

This is a common problem. i havent completly solved it yet but this helps.


Be very careful doing this, There is Voltages with AMPERAGES high enough to boil your blood inside a microwave.

I had mine apart cleaning it. Only one number worked on my display. I wiggled and messed around with the wires in the back of the display. And almost every number in the display works again. Hope this helps.

I had the same LCD problem and found Mr. Miller's website (listed in the above response: http://www.microwavedisplay.com).
That was 8 months ago. The microwave works flawlessly since then. Highly recommended and Many thanks for the simple solution.

We regularly repair such control units and displays for customers nationwide by mail for $39.95 postpaid in about a week with a one-year guarantee.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
[email protected]
http://www.microwavedisplay.com

Thanks articaco. I'm kind of guessing that these boards cost nearly as much as a new microwave. I've been living with this one like this for ages now, as it first deteriorated little by little and now is down to a partial display of the two right digits. I priced one for my microwave and it came in at $150.  My microwave is about 11 years old. I was just hoping I could fix it with something simple and cheap. 

You medd whats called a smart board. these go out a descent amount you can get and in stall the board yourself for maye around $100