No signal error when turning on TV

Is ur tv a CRT tube type of a analouge tv u are asking?Yes than the tv don't have HDMI inputs hubs for HDMI cables connections.Only some projection tvs,all plasma,LCD and LED tvs have HDMI inputs hubs only and able give ur tv incomming signals HD 1080i for a broadcasting and HD pictures or throught a HD boxes or games devices like Xbox or Playstation 3 devices to get HD output picture for like 1080p.

you have to check you timinig on/off setting.

Hookup the the vcr to the AV jack then plug the antenna and other devices into the vcr and tune everything through this. The AV ports on a TV are independent of the internal analog/digital tuner.

check the horizontal output of your tv set,if short you need to replace it.

Please verify that your model is the KV-32FS13 as each model ins somewhat unique in the parts required for change.

Thanks,
Dan

The 4 blinks usually mean a vertical deflection problem. If you can solder you should be able to repair this yourself. Let me know if you wish to attempt the repair and I'll provide more details and instructions.

Dan

The tech is wright about the deflection board having a fault. This failure is found in the vertical deflection circuitry.
The quote is the one that seems to be a bit high, instead of getting this TV fix; I would save that money to buy another TV.
Good Luck.

The set should have a blinking standby light when you attempt to turn it on. Please update this with the count and that should give me enough to propvide some details.
Dan

has a power supply or deflection fault requires service

The HOT transistor is shutting it down. (horizontal output transistor)
it cost about 8.00 for the parts and 100 for the labor.

you will require help from a tech.