Question about Philips Televison & Video

1 Answer

I bought a Philips digital flat televisions from a hotel . When I press the menu button on the tv all that appears is NOT AVAILABLE. How do I get the TV out of hotel mode so I can acces the the menu etc.?

Posted by jakegyakes on

Ad

1 Answer

The Knight

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Philips Master
  • 76,416 Answers

Download its user manual. It will have details about how to come out from hotel mode.

Posted on Jun 07, 2012

Ad

5 Related Answers

Anonymous

SOURCE: Frozen digital screen

Set TV to standby and press Info, menu, mute then power. The set should turn on with the service menu available scroll down until you select reset press right hand arrow next to enter and then enter. TV will turn off. When switched on it goes into Plug and Play mode to reset the analogue and digital tuner. Allow a full reset then you should be ok.

Posted on Jan 28, 2008

Ad

Anonymous

  • 61 Answers

SOURCE: menu pops up while tv is on

Isolate the problem by removing the batteries from the remote. If the problem goes away replace the remote: "CHEAP" .
If the problem does not go away, the problem is in the TV, repair the TV "EXPENSIVE" !

Posted on Aug 29, 2009

Mick

  • 325 Answers

SOURCE: Lg hotel tv. t.v. button are locked out, only hotel remote works

Hold down the MENU button on the remote for approx 5 seconds. Then enter 1105 this will access the hidden hotel option on the LG tv so you can change whatever you like..

Cheers LITTLE DISH FITTER

Posted on Sep 01, 2009

Anonymous

  • 1077 Answers

SOURCE: my flat screen tv does not have a picture or

I've had the same problem with a 32" model LC320EM82S. All the Emerson TV ( no matter what size ) are having the same issue.
I'm sure with your TV, the green light is blinking before the TV automatically turns OFF. Basically, the TV is trying to power up the screen and has failed. Protection mode turns the TV OFF to prevent other parts from being damaged inside.
My solution for fixing my TV was replacing one bad inverter transformer of six on the Backlight Inverter/Power Board. Here is what my board looks like: 767c946.jpg
You can see the six inverter transformer on the bottom of the board. It's what supplies power to the screen. Your board may look similar. You can sometimes find a whole replacement board over the internet for a good price. Shopjimmy.com is a good place to start. Just start searching by your TV model number.
If you have some electronic experience, you can repair the board itself by finding a Service Manual over the internet for less than $20. It will have all the part numbers, schematics, and diagrams you need. I would investigate the inverter transformer for your problem.
I hope I helped you out with your problem.

Posted on Sep 04, 2009

nileshsingh2

Nilesh Singh

  • 246 Answers

SOURCE: I bought a Panasonic 42

If you cannot find the remote control at all, you will need to reprogram the EPROM IC. This IC is inside the tv, with numbers starting or in between 24c02.... Please contact any qualified tehnican for further help. The IC i mentioned is programmed and at present it is locked through Hotel Mode. Also try to look RESET switch, to reset the whole unit. Thanks

Posted on May 15, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get Sanyo dp50741 out of hotel mode?!


This is for Panasonic but might help you
Getting out of the hotel mode is very easy. Just go get the Panasonic remote and open your tv. Go near the tv and hold down the AV/- button on the television itself. Then use the remote and press the AV button for 3 times. A hidden menu on the television screen will appear. Turn off the "Hotel Mode" from the menu and exit. Do not touch anything from the hidden menu except the hotel mode. Now you can use your tv in normal mode. The remote is required to access the hidden menu so be sure your remote is working and has working or full charged battery before doing the steps above.

Read more: My 50" sanyo plasma tv is stuck in hotel mode how do i get it out of hotel mode? - When i turn the tv on it says D01--32 and a blue lower case u under it :: Ask Me Fast at http://www.askmefast.com/My_50_sanyo_plasma_tv_is_stuck_in_hotel_mode_how_do_i_get_it_out_of_hotel_mode-qna4904417.html#q5129429

Nov 28, 2015 | Sanyo Televison & Video

1 Answer

Philips tv digital disappeared


There may be a firmware upgrade needed here--ask Philips what is available for this model.

Jun 13, 2012 | Philips 37PFL5332D 37 in. LCD Television

3 Answers

I need the code that will tske my samsung 40" out off hotel mode


hello,
To switch off hotel ode on samsung, enter:
1. On standby press info-menu-mute-power or,
2. press mute-1-8-2

After service mode appear, Choose option block,
Fine Hotel mode, change to off.

If in option block you can't fine it, try open other block.
Good luck.

Apr 16, 2011 | Televison & Video

1 Answer

LG TV 50PQ300:'Keylock on' .Cannot select 'set up' or 'input'.only AV1 works. Can anyone help please???


Press and hold MENU buttons on front panel and remote control until service menu appears.
Press MENU button once again.
Disable HOTEL option.

I hope this helps!

Apr 08, 2011 | Televison & Video

2 Answers

Reset Hotel mode


Hi, have you tried holding the TV menu and the remote menu buttons together, then selelcting menu again on remote.

Oct 02, 2010 | LG 37LG50 37 in. LCD HDTV

1 Answer

Channel setup


You will have to run the Autoprogram menu function from the menu. Here are the steps

Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Use the cursor right to enter the Installation menu.
Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
Press the OK button.
Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC,ATSC, QAM modulated) channels available in your area.
Make sure that registration with your cable TV provider and connection of equipment are completed.
Press the green button “Next” on the remote control.
Press the green button “Start” to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is displayed.The progress bar indicates the number of analog and digital TV channels found. (Also digital channels via CableCARD are being programmed.
When Autoprogramming is complete, a message appears confirming the completion and the TV switches to the first installed TV channel.

Mar 16, 2009 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

Can't find menu on hotel tv


YOU WILL NEED THE SPECIAL REMOTE TO DO THIS. AND I THINK SOME OF THEM HAVE ABILITY IN SERVICE MENU TO TURN OFF HOTEL MODE. OR YOU CAN TRY USING ANY PHILLIPS/MAGNAVOX REMOTE WITH THE STATUS BUTTON AND TRY THIS.
PRESS MENU-9-6-5-2-STATUS AND YOU SHOULD BE IN THE SERVICE MODE TURN OFF THE HOTEL MODE

Jan 03, 2009 | Mitsubishi CS-35707 35" TV

1 Answer

Bought TV from hotel not getting channels and not playing dvds


in the menu usually a button on tv switch from antenna to cable or catv

if you remote won't work there are 7 or 8 different code choices go through them till it does work

most unversals need tv on and will turn off when code is right

also in menu is audio choices stereo on /off and so on play in there till you get it

Dec 26, 2008 | Philips TV Tuner Video Capture PCI Card -...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...