Confirmation on fax

To change fax confirmation
1. Press Setup.
2. Press Print Report, and then Fax Confirmation.
3. Press the right arrow button to select one of the following, and then press OK.

Off - Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.

On Fax Send - Prints a fax confirmation report for every fax you send.
On Fax Receive - Prints a fax confirmation report for every fax you receive.
Send & Receive - Prints a fax confirmation report for every fax you send and receive.

If you require printed confirmation that your faxes weresuccessfully sent, follow these instructions to enable fax confirmation beforesending any faxes. The default fax confirmation setting is Off. This meansthat a confirmation report is not printed for each fax sent or received. Aconfirmation message indicating whether a fax was successfully sent appearsbriefly on the control-panel display after each transaction. NOTE: You can include an image of the first page of the faxon the Fax Sent Confirmation report if you choose On Fax Send or Send &Receive, and if you scan the fax to send from memory To enable fax confirmation
1.Press the (Setup) button.
2.Press right arrow to select Print Report, and then press OK.
3.Press right arrow to select Fax Confirmation, and then press OK.
4.Press right arrow to select one of the following, and then press OK. Off Does not print a fax confirmation report when yousend and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every faxyou send.
OnFax Receive Prints a fax confirmation report for every fax you receive.
Send& Receive Prints a fax confirmation report for every fax you send andreceive

Hi,

Follow the steps below to enable the Fax confirmation on Sent and recieved.

On the printer :

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
   • On Fax Receive: Print a confirmation page every time you receive a fax.
   • Send & Receive: Print a confirmation page every time you send or receive a fax.
4. Press OK .

Thank you for contacting FixYa


*Please rate this solution with Thumbs Up

Hi,

Follow the steps to setup the Fax sent confirmation report.

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
4. Press OK .

Other confirmation reports in the same menu are :

• On Fax Receive: Print a confirmation page every time you receive a fax.
• Send & Receive: Print a confirmation page every time you send or receive a fax.

Hope this is helpful

Thank you for contacting FixYa.


*Rating and comments invited on this solution

If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.

The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after each transaction.

To enable fax confirmation from the control panel

1. Press Setup.

2. Press 2, and then press 3.

This selects Print Report and then selects Fax Confirmation.

3. Press to select one of the following, and then press OK.

Off Does not print a fax confirmation report when you send and

receive faxes successfully. This is the default setting.

On Fax Send Prints a fax confirmation report for every fax you send.

Fax

On Fax Receive Prints a fax confirmation report for every fax you receive.

Send & Receive Prints a fax confirmation report for every fax you send and

receive.

To enable fax confirmation via the device control panel
1. Press Setup.
2. Select Print Report, and then Fax Confirmation.
3. Select one of the following: On Fax Send, On Fax Receive, Send &
Receive
4. then press OK

Try this:

Press the Setup button (it might be the sign of a monkey range)

1. Press the Down arrow ( ) to highlight Print Report , then press OK .
2. Press the Down arrow ( ) to highlight Fax Confirmation , then press OK .
3. Press the Down arrow ( ) to select one of the following options in the table below, then press OK

On Fax Send Prints a fax confirmation report for every fax you send. On Fax Receive Prints a fax confirmation report for every fax you receive. Send and Receive Prints a fax confirmation report for every fax you send and receive. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting.

Select the one you would like to choose ;
For further help click on the following Link:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01083680&cc=us&lc=en&dlc=en&product=3204785

Regards Soumajit

This is an excerpt of the User's Guide for your machine. You can download from here:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=1138342&


Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after
each transaction.
To enable fax confirmation from the control panel
1. Press Setup.
2. Press 2, and then press 1.
This selects Print Report and then selects Fax Confirmation.
3. Press to select one of the following, and then press OK.

Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.
User Guide 65
Fax
Tip If you choose On Fax Send or Send & Receive, and scan your fax to send from memory, you can include an image of the first page of the fax on the Fax Sent Confirmation report. Press Setup, press 2, and then press 2 again. Select On from the Image on Fax Send Report menu.

Hi,

I don't think there's a log you can print but you can do the following. Not quite what you want, but better than nothing...

You need to set the fax confirmation option to log faxes before you send anything. The default option is off, so you won't be able to get a fax log for anything you've already sent unfortunately.

1. Press Setup
2. Press 2 then press 1. This displays the Print Report menu
3. Select Fax Confirmation
4. Press to highlight one of the following, then press OK

Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.

You can get the manual here if you do not have one - LINK.

Here is an exert form the manual on this:
Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either On
Fax Send or Send & Receive.
1. Press Setup.
2. Press 2, and then press 1.
This selects Print Report and then selects Fax Confirmation.
3. Press to select one of the following, and then press OK.
Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send &
Receive
Prints a fax confirmation report for every fax you send and
receive.