Autocad printing. drawings print fine, but imaged photos attached to drawings not or partially printing. print preview looks fine. original images are jpeg and when imaged compress to jfif files. need to know if software driver problem HDI drivers or and internal problem with printer. thankyou regards Anthony
SOURCE: canon bjc-80 - no print appears but cartridge & paper move normally
I had this problem too. It turned out there was old dry ink in there clogging up the printerhead and it was fixed after I ran the cleaning programme several times. However I can't for the lifeof me remember how to do that now. I know I found it online but it has since vanished. Maybe check your manual?
SOURCE: print driver for vista windows
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&modelid=9437
Follow this link and download the :
D700_PrtDriverV110_WinVista_En.exe
SOURCE: canon bjc 50 printer
You are correct on your deduction.
It is the USB to Parrallel adpter. They are not reliable in the XP/Vista enviroment. I have run into this several times.
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
SOURCE: my canon pixma mini260 will not print full image
Make sure the settings are on A4 not A5. In the printer settings
SOURCE: Why do my copies have stripes on them?
Have you tried clearing the cartridge and the jets? Follow the instructions in Properties.
181 views
Usually answered in minutes!
×