Question about Siemens Lands Phones

1 Answer

Seimens Gigaset AL285 BSNL caller ID not working

The caller id of the Seimens Gigaset AL285 from NL, Europe, does not work with the BSNL Landline connection.

Posted by Anonymous on

Ad

1 Answer

JamesC

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The source of my caller ID not displaying was a faulty ADSL filter.
For some reason my ADSL filter blocked the caller id information - but worked fine otherwise.
When I changed the filter the caller ID worked fine again.

Posted on Apr 24, 2013

Ad

5 Related Answers

Anonymous

SOURCE: caller-id quit working

This is a followup to my earlier suggestion. My caller id is working. So, the culprit had to be related to the 9V battery. Just try my earlier solution from 1/20/07. If it works..fine. If not, bye-bye to the phone.

Posted on Feb 10, 2007

Ad
zowl

Gerald Ridge

  • 15 Answers

SOURCE: Caller ID not working

Hi,

I don't think the problem is the FSK vs. DTMF. The manual even states that the caller ID is generally received after the second ring. This is true in America. I lived in India for four months and I never ran into the problem there so... I just can't say how your provider sends the caller ID. It may be that the line is being interfered with. Do you have a DSL line attached to the same device. If so make sure that there is a filter between you phone and its connection.

I am assuming that you tested your line with the other equipment connected to the same location. You may want to reduce the problem to the simplest configuration by connecting directly to the line only no other equipment. If it works add the other equipment until the caller ID stops again. Then you know what is interfering. If you have a monitor set you could listen to the DTMF being sent make sure it is coming between the first and second ring. It is audible if it is there. If you are answering on the first ring you will not see caller ID you have to wait till after the second ring then you should see it, If BSNL is sending the same as American systems. Good luck Z

Posted on Mar 12, 2008

expertsarah

firdous mazhar

  • 70 Answers

SOURCE: caller id button is not working

try to change the battries of your phone.

Posted on Jun 18, 2009

Anonymous

  • 32 Answers

SOURCE: Talkswitch caller ID from outside calls not working

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

Posted on Jan 21, 2010

d3vlabs

  • 3 Answers

SOURCE: nortel norstar m7310 phone caller id problems

@relax536

to find out your phone's extension dial
Feature *0 Intercom

Posted on Mar 15, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Caller ID is not working


Hello Samiran mandal, here is a solution.I purchased one cordless telephone (Siemens Gigaset) in Germany. I also had the same problem, caller-id did not work. I purchased this telephone because we can set different ringtones for different caller groups. But, if caller-id doesn't work, this feature also doesn't work. I had gone through internet and finally found that CA electronics, Bangalore has it and got it through courier (I live in Pondicherry). It worked flawlessly for two years. Then it stopped working. For 'no reason' I ordered for a 'caller-id' unit on ebay for Rs.75/- (+ Rs.75 shipping). I just got the unit and fixed it to my line. Very very surprisingly, my cordless telephone is now showing caller info. This is a real surprise to me. By the way, caller-id unit is "Eurotel" make, DTMF/FSK caller-id. I feel this is very nice solution. The 'caller-id' unit is nice (backlit display) and also there is no need of converter for using the caller-id feature of your foreign telephone. I connected caller-id between the line and telephone. That's all. Enjoy.

Apr 12, 2013 | Lands Phones

1 Answer

I HAVE A PANASONIC KX-TGA402 CALLER ID NOT WORKING


I purchased one cordless telephone (Siemens Gigaset) in Germany. I also had the same problem, caller-id did not work. I purchased this telephone because we can set different ringtones for different caller groups. But, if caller-id doesn't work, this feature also doesn't work. I had gone through internet and finally found that CA electronics, Bangalore has it and got it through courier (I live in Pondicherry). It worked flawlessly for two years. Then it stopped working. For 'no reason' I ordered for a 'caller-id' unit on ebay for Rs.75/- (+ Rs.75 shipping). I just got the unit and fixed it to my line. Very very surprisingly, my cordless telephone is now showing caller info. This is a real surprise to me. By the way, caller-id unit is "Eurotel" make, DTMF/FSK caller-id. I feel this is very nice solution. The 'caller-id' unit is nice (backlit display) and also there is no need of converter for using the caller-id feature of your foreign telephone. I connected caller-id between the line and telephone. That's all. Enjoy.

Jun 14, 2012 | Panasonic Lands Phones

1 Answer

KX TG1061 panasonic phone called id not working in India


Hi,
Try connecting your phone to some other phone lines in which the caller id is working properly and this way you can check if the problem is with your device or line.

For all the phones to display the caller information properly, CLID (caller line identification service) should be enabled for your landline connection. Please contact your phone line provider to enable this service and you should be able to see the caller id information in your panasonic device.

I hope this is helpful to you
thanks
Please rate the solution

Sep 18, 2010 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Configure gigaset SE587 for BSNL broadband


Hi,

If this is router is gifted to you by a friend of yours who is from UK, Please check if this is locked. Most of the times these would be locked by the ISP. This is a router provide by tiscali UK. Please select the dialing number to 0,38 this is the dialing code for india.
If you use this should work and use 192.168.1.1 as default DNS.

Oct 30, 2008 | Siemens SpeedStream 2624 (SS2624) Wireless...

3 Answers

Caller ID not working


Hi,

I don't think the problem is the FSK vs. DTMF. The manual even states that the caller ID is generally received after the second ring. This is true in America. I lived in India for four months and I never ran into the problem there so... I just can't say how your provider sends the caller ID. It may be that the line is being interfered with. Do you have a DSL line attached to the same device. If so make sure that there is a filter between you phone and its connection.

I am assuming that you tested your line with the other equipment connected to the same location. You may want to reduce the problem to the simplest configuration by connecting directly to the line only no other equipment. If it works add the other equipment until the caller ID stops again. Then you know what is interfering. If you have a monitor set you could listen to the DTMF being sent make sure it is coming between the first and second ring. It is audible if it is there. If you are answering on the first ring you will not see caller ID you have to wait till after the second ring then you should see it, If BSNL is sending the same as American systems. Good luck Z

Mar 12, 2008 | Panasonic (KX-TG1032S) Phone

1 Answer

Caller id


Caller ID in the USA uses the FSK standard. For the most part, caller ID in India uses DTMF (although I have heard of some FSK usage).

I am currently living in New Delhi and have an Airtel home phone line. My switch uses DTMF. I went to the Palika electronics bazaar (I aways use shop number 266 near gate 5, they seem to be a little kinder to foreigners as far as the "final price") and purchased an DTMF to FSK convertor. My US phones now show caller ID information, although using US number seperations ### - ### - ####. I paid R500 but you could probably get it for around R400 if you are willing to put in the time bargaining. It looks like they are also available on Indian Ebay.

Mine says UST001B. It looks like these are low volume items because they stuck the components into a box marked "DSL Splitter" It works to convert the caller ID as advertised.



May 03, 2007 | Siemens Gigaset 4215 Cordless Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Lands Phones Experts

Cindy Wells

Level 3 Expert

6234 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you a Siemens Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...