Power is coming through the system, however once on, it says "Push Power Protect". I have tried to reset the system but this does not help. Everything lights up but it just won't let me do anything else.
Cd changer moves and it sounds although cd is being read but still nothing happens.
If anyone can shed some light on a resolve for this, it would be very much appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The "PROTECT" and "PUSH POWER" messages will flash alternately when the protective device of the amplifier has been activated because a strong signal was input, or if there is a short-circuit detected. Press the POWER button on the unit to turn off the system, and check the following items after "STANDBY" disappears.
1) Are the + and - speaker cords short-circuited?
2) Are you using only the specified speakers?.
3) Is anything blocking the ventilation holes of the system?
You may also refer to the following link for additional troubleshooting steps.
Push power protect is an indication of an output failure ( Amplifier ). The Home theater system is asking you to switch off the power to prevent further damage. This mode is called protection mode and you will need professional help sort it out.
Still Problem, Turn Off system and Check the Speaker Code
RESET the system .
Remove all the connections, leave it for 24hours and then connect it up again
Unplug Power Code
Plug it back again
Press Stop , Enter and Power button at Same time
Press Power Button to Turn on it
For more Here is the Guide for your Product Click here Still have Problem The protective device on the amplifier has been activated because of short circuit. (“PROTECT” and “PUSH POWER” flash alternately.) Turn off the unit, eliminate the short-circuit problem and turn on the power again. Hope you Got a Conclusion..Thanks for Contacting FixYa...