Question about Dell W2600 26 in. LCD Television

1 Answer

Sound proplem I have a Dell W2600 LCD TV,Picture is perfect but sound was proplem:I hear distortion sound then click...silence...distortion sound then click...silence... I scoped the audio signal and found out the proplem at right speaker sealed box and I saw 3141 130 00031 part number of this box? Please.let me know the exactly part number of right speaker sealed box included circuit board inside

Posted by minhcuc5657 on


1 Answer

kenn green

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 90 Answers

Its the audio amp, its fried and needs to be replaced. match the numbers up and purchase/replace boards, this will solve your problem.

Posted on Jan 31, 2009

  • kenn green Feb 08, 2009

    the number you listed, is the Inventory number for the replacement speaker. it's still the audio board located inside the the closed assembly. its about 3 inches and has 3 plugs 2 of which are the actual left right speaker hook ups. remove board and inspect both sides for severe burns on board. if burnt, must be replaced.



Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Dell W2600 well not turn on have to unplug you can hear it click then plug back in and some time it will turn on

This sounds like Electrolytic Capacitors that are needing replacing, Common fault with LCD, If you know how to use electronic tools you can open the TV and you will see the tops of the capacitors are bulged and they need replacing.

Oct 25, 2010 | Dell W2600 26 in. LCD Television

1 Answer

Dell W2600 TV. Picture goes black after being on for 10 min.

Back lights invereter or power supply. look for 24vdc on the power supply which is needed for the inveeter board.
look for bad caps in the power supply.

Nov 24, 2009 | Dell W2600 26 in. LCD Television

1 Answer

W2600 no picture but sound

There is a porblem at the video card of this TV pls check the voltage from the power supply to this board
If then votage is there then an I C if overheating or licking ie the processor add a fan to cool this chip .

its going to work

good luck

Sep 08, 2009 | Dell W2600 26 in. LCD Television

2 Answers

Dell 26" LCD TV has sound but no picture.

A common fault are the back plane power supply, and back plane lamps. These are not changeable in all models of screens. It is also possible to have a failure on one of the processor boards that will cause no picture.

Jerry G.

Jun 30, 2009 | Dell W2600 26 in. LCD Television

1 Answer

Sound but no picture

Need more details. What is your signal source (cable box, DVD etc). How is it connected (RF, RCA, S-Video, RGB, HTMI)?

Jun 25, 2009 | Dell W2600 26 in. LCD Television

1 Answer

Will not turn on, but I do hear a click like it wants to

The power supply is probably shot. An expensive repair...mostly labor.

May 08, 2009 | Dell W2600 26 in. LCD Television

1 Answer

Dell no sound

I also have Dell W2600 TV and have sound problems

Dec 14, 2008 | Dell W2600 26 in. LCD Television

1 Answer

Dell W2600

you are loosing communication signal from remote to TV. The main board is responsible for the communications. its the board with the most connections located on the back under the back cover and top cover of the circuit boards. Replace that board, u should be ok. Do a ebay search for main board for dell w2600

May 21, 2008 | Dell W2600 26 in. LCD Television

Not finding what you are looking for?
Dell W2600 26 in. LCD Television Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Level 3 Expert

778 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers


Level 3 Expert

85239 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides