- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you have the speakers hooked up already and you just need to figure out the power,yellow and what about black ground?Let me know.I am looking around now.What car make/model are you putting it into?Also,where did you purchase the stereo?Online,store,etc.?
It is not reading the cd. The laser is dirty, out of alignment, or bad. If it is under warranty, contact Aiwa. If it is not, you should just replace it. Just to take the lid off, and find out what is wrong will cost you about $80 at most repair shops. For $120 you can buy a new am fm cd with Ipod control and USB port. Hope this helps.
Keep in mind that there are always two fuses in any vehicle that provide power to the radio. One fuse is for switched power, one for constant power. Both fuses need to be good before the radio will work. Often one of the fuses, especially the constant power fuse, is shared with other electrical circuits and may not be labeled as a radio fuse.
Check all the fuses in the vehicle, including any fuse box under the hood. See if any other electrical systems in the car aren't working, especially the dome light, cigarette lighter, door chime buzzer, or clock.
GO to WallMart, Kmart, Radio Shack, etc. and get a new connector adapter (plug)...they're reasonably priced, have them for all make/models of cars, and make installing a car stereo a breeze! When you get the one for your specific car, the wiring instructions are quite easy to follow! :-)
Thanks very much for the assistance. I just finished downloading the manual. John
i need to know how to keep the color from switching from blue to red, i want to keep it red.