Question about Mach Speed P4M800 (890552603480) Motherboard
I am building a computer with a mach speed p4msd-800d2 with pentium D 3.0 ghz dual core. I had the cpu fan installed incorectly and the motherboard powered down as it should, I fixed the cpu fan now the computer turns on but I get no video, no beeps from the motherboard nothing, but the fans running. I tried clearing the cmos, but still nothing should I buy a new cpu or motherboard?
I had the same problem once. I took it to CompUSA to have them diagnose the problem, and they said I fried the motherboard or CPU. The fans turn on just because your power supply is on.
Posted on Nov 17, 2007
Hi, im building a computer for a friend, that uses the same board and everything. I was wondering if you could please tell me where to get the network drivers for that paticular board? i tried going to the website but it's a discontinued board and it's kinda hard to get the drivers for it.
Thanx! :)
Posted on Dec 17, 2007
Are u using video card? if yes, try to replace it. if the problem persist try the motherboard change or the cpu, since you've just recently buy these products, i beleived this comes with warranty! you can ask them to replace it!
Posted on Jan 14, 2007
225 views
Usually answered in minutes!
I tried removing the video card, didnt work. I bought all the parts online, so exchanging them is a pain, I just wanted to know what I should thy and change first the cpu or the motherboard
the computer turns on but I get no video, no beeps from the motherboard
nothing, but the fans running. I tried clearing the cmos, but still
nothing should I buy a new cpu or motherboard?
×