Tigershark cleaner moves in one direction only

AMAZON, USE MODEL # SEARCH

sounds like it needs a repair kit for the gears. look see Tiger Shark Plus Google Search

Thank you for posting your question here on Fixya.com.

Look as best you can inside the side plates around the tracks for debris obstructing the tracks. If you need to, remove all 7 screws inside the cleaner to remove a side plate and clear whatever may be inside. If nothing is blocking the tracks the motor unit has failed and needs to be replaced. For an estimate or for information about getting it serviced please contact us thru our site at www.arrowpools.net.

If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!

John

With the cleaner out of the pool flip it upside down and remove the bottom lid. Inspect the outer case along the seam where the dark and light color plastics meet. If you find cracks patch them with a two-part epoxy made to repair plastics.

You will also want to inspect the outer case return flaps that are directly behind the brushes. Those flaps can come loose or fall out and will let debris out of the unit.

Check the flaps within the bottom lid itself to be sure they are still installed and functioning properly. A twig of leaf can wedge into the hinge and block the flap from closing allowing debris out of the bag.

Finally, inspect the bag for any holes or wear that could allow debris to escape.

One or more of these issues should be the cause and once corrected your cleaner should operate as it should.

John

The tracks for the Dirt Devil Rampage pool cleaner are the same as the AquavacTigershark. Simple look for the parts for the Tigershark. Its the same exact thing.

The motor that drives it forward and back is seperate from the fan and is defective unless your stuck on the main drain the motor unit needs replacing.