No Sound Hi all, I too have an AVR2802 and it has worked fine for the last 4 years. All of a sudden after using the "macro on" function on the remote it decided to have no audio output. This also happened 6 weeks ago and I sent it to a denon repair centre and 7 days later I get a call to pick it up and no problem was found. I have reset the receiver by powering down and holding the speaker A&B buttons down and turning on the unit to initialise the processor as described in the manual but still no sound. I have checked all of the wires, fuses and all other functonailty is perfect, but still no sound. I have unplugged the unit and will wait 24 hours to see if it resets as I suspect this is what happened after waiting so long for the repair shop to take a look. I am $65 out of pocket with no solution of how to fix this. I am glad to hear others with the same issue and if i find a solution will post it here. The is no smoke, no wire issues or input issues the sound is completely abscent as an output. Any help would be welcome, I am going bananas Harro