My camera problem was if i take a picture there's no image comes out from the monitor all black it still flashing and saving the image but the image was black. and it say's battery exhausted even i charged it for four hours.
I beleive your shutter blade is stuck and thats why your lcd screen stays black even if you take pictures. It cannot get to the actual part that allows you to take images. That is something you will have to take to a repair person to fix because they would have to take the full camera apart to fix the shutter blades. Now for the battery, it might be an easy fix by getting another battery and if not you have damaged the part of the electronics inside that allows the charger to charge properly.
Good luck and I hope this helps some.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is not necessary something wrong with the camera itself. Sometimes the simptom is caused by the memory card. Reading from it works (so you can see older pictures) but every new picture is written wrong, so the camera shows only black.
Hello, I went and researched a few points in the manual and hope this helps to some extent. If this doesn't help, try resetting your camera by removing the batteries for 30 seconds, then reinstalling them and turning on the camera again.
Monitor is blank: • Camera is off. • Batteries are not correctly inserted or battery-chamber cover is not properly latched. • Batteries are exhausted. • EH-62B AC adapter (available separately) is not properly connected. • Camera is in sleep mode. Press shutter-release button halfway. • Monitor is off. • USB cable is connected. • AV/Video cable is connected
No picture is taken when shutter release button is pressed:
• Camera is in playback mode. • Batteries are exhausted. • Red (!) lamp flickers: flash is charging. • Green (AF) lamp flickers: camera unable to focus. • Message "CARD IS NOT FORMATTED" appears in monitor: memory card is not formatted for use in your camera. • Message "OUT OF MEMORY" appears in monitor: insufficient memory to record picture at current Image mode setting.
My viewing screen is black. I had successfully taken a picture, viewed it, and turned the camera off. When I turned it back on about 30 seconds later, the viewing sceen was black. I can 'take' a picure, but it comes out black. Help!