Question about Nintendo GameCube Console

2 Answers

Problems with Call for Duty 2 - GC grey screens after 25 minutes

Recently purchased a brand new Call for Duty 2 for GC. Regardless of what level my kids are at, after about 25 mins or so, the unit grey screens requiring a reset. This does not happen with any other game incl Zelda, Need for Speed, FIFA editions, NFL, NHL and others. The fact that it happens consistently on this particular game, and regardless of what level they're at, leads me to think it could either be an overheating issue (but why only on this game) or something else. Any suggestions for debug? Suggestions for getting around this so we can play the game?

Posted by Ilias Carius on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

It could be an issue of what Model machine you are using.. The way games are programmed, its not common, but sometimes operates differently depending on what model you are using.. If the game freezes on a friend's machine, then its a defective disc.. but if it only freezes on yours, it could be the model of your machine.. or specific machine having a hard time to read the machine... I'd suggest trying to clean the lens, maybe with a Mini Disc Lens Cleaner, and if that doesn't help... It could... MAYBE... be an issue with the memory card.. games have been known to be twitch depending on the memory card... especially third-party memory cards... the official Nintendo cards are very reliable, and have no issues... but if its a third-party company made memory card, they have been known to have many random issues, and are basically unreliable.. If you have a third party memory card, try getting an official Nintendo memory card and see if it does the same thing...

Posted on Apr 30, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

I've played that game before and there is a cheat to make it grey if you beat easy mode. I don't really get the point of the cheat but that's what it does. Maybe it's just a glitch. Sorry if that was irrevelant. I'm pretty sure that would just be the game itself.

Posted on Jan 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why is the oil in my honda gc 190 grey

grey oil is water contamination. check for leaking seals to stop water getting to the oil
0helpful
1answer

Hello i have a problem with my Citizen Cyber Aqualand NX. He is flashing FILE. I have tried to do the garbage collection, but he said Fail. Also the Formatting of the Flash memory dos not work, and said...

I got last year same problem, easy to resolve :) I was doigng GC and i got my watch in failur exactly like yours. Solution? Buy 4 fresh, alkaline, good brand batteries. Put it in charger unit. Let the watch to charge for 12hours. After do garbage collection again or formatting if you cant do GC. If you got again fail, charge again it for 12 hours. I did it for 3 times and...the third days, I got "Done!" and solved :) It happens when battery is not full charged, so do GC just when is very charged. I love my Cyber, but sicne seems that GC collecting drink a lot of energy seems that low level battery doesnt let the inside flash memory to work well when try to format/GC datas.
0helpful
1answer

Welder shuts off after a while of welding, what I am I doing wrong

Make sure you're not exceeding the duty cycle of the machine. Refer to your owners manual for the correct duty cycle to be sure.

The duty cycle is based in 10 minute increments. If your machine has a 60% duty cycle, you can safely weld for 6 minutes, then should allow the machine to cool off for the remaining 4 minutes. An 80% duty cycle allows for 8 minutes of use and 2 minutes of cooling, and so on.
0helpful
1answer

Every time i put my brand new (purchased two hours ago) call of duty black ops game, the screen goes to the XBOX 360 screen, and freezes there. the hard drive i have for my console is also brand new, well...

firstly its refurbished so you have to be careful because it may have had problems in the past, it referring to your hard drive by the way. ad secondly maybe its just your black ops disc? try playing black ops on another xbox console and if it freezes than its not your console its just the game =) then get a replacement and dont worry.
0helpful
1answer

Hi there, I have recently experienced problems with my ps3. When I put in my fifa 10 disc it plays for about 10 minutes then the crowd goes silent and when i pause all the ball goes out of play it freezes....

right m8 sound like the new update has messed up your system to try and update the system again by going to system update> download via internet once you have done this try your games again if problem still percists try this (LAST OPTION ONLY) turn your system on hold down the on/off button till it beeps twice then let go quick you should have a new screen select option 3 it will reset then do same again but select option 2 doing this should reset the system properly you wont lose any data tho pal so dnt wory messeage back if any problems

0helpful
1answer

Extremely long warm up time 25 minutes. ok once it comes on.

Just a shot in the dark- I think your main projection lamp is going bad- If the set is more than a year or 2 old it can happen. Unfortunately they are a little expensive.
How is the brightness level after it warms up??
0helpful
1answer

The gc is reading the discs, but i can't get a coloured picture

if you are not using the cords that came with the system then use them or get new ones if that is not he case then borrow a friends and if they don't work then repair or return the system
0helpful
1answer

Broken GC controller

yes you can. but only though the internet.
0helpful
1answer

L g steam washer front load

The model you have this listed under WM2688H (LG Steam Washer) a E1 Code Correct water level (246) is not reached within 8 minutes
after water is supplied or it does not reach the preset water
level within 25 minutes.
I suggest you
Check the screens in the water inlet valve for blockage
Not finding what you are looking for?
Nintendo GameCube Console Logo

47 views

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

1042 Answers

Ekse

Level 3 Expert

13435 Answers

Aron

Level 3 Expert

2003 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...