Zenith xbr413 This machine keeps kicking vhs tapes back out any help please

The DVD player is defective, you will need to replace it because they are not rep[aired due to the cost being so low for new.

You might consider after making the first if your computer is capable of making fast copies with it.

take the top off and eject it manualy, there is nothing else u can do with replacing a part, (small white spring loaded, ) probabaly

Hi there,

Go here and download zenith xbr413 user manaual

Download zenith xbr413 user manaual

Hope this solution helps.

Please rate my solution here.

micromaster-

You may need dvd- disks instead! ( it usually one or the other!) and if your player does take a DVD+ you might have to change brands of disks ( I know this sounds stupid but all disks are not created equal! and do not work in all players!
Please rate this response and help keep this site free!
THANK YOU!

every time i put tape inside vcr it keeps ejecting but every twenty attempts only it works without ejecting. please help
Note: my VCR is part of TV and DVD player

you have to finalize the disc first.once it is finalized you can not record any more material on it,so make sure you record everything you want on a disc. you can maximize disc space by changing speeds on the dvd recorder. for example: if you have 5 hrs of stuff on a tape, set the dvd recorder for 6 hrs or more recording time.the quality should be ok [depends on how good of quality you want] if you set the speed for 2 hrs, your quality would be better, but obviously everything won't fit.
hope this helps
wg

VHS tape to a DVD-R

This suggests that you are net setting up the DVD recorder up correctly,
Check- are you connecting to the correct 'INPUT; port?
Check have you select the correct chanell that points to this port.
Carefully go the the book- vey can be very dense to read.

If the VCR tape has copy protection on it, I could see it doing this.