Cracked screens in the r707 is easy replacement. I just tend to swap screens from another r707 that has a lens issue. I have noticed that there is two types of LCDs in the r707 camera. One is easy type to replace because all it has is a serial cable that is attached circuit board. The other is a little harder because it has, besides the serial cable, two additional wires that are soldered to the board. The lcd is actually attached the black half of the camera's case. You will have to remove all of the screws and then remove the front (metallic) half of the camera. There are two cables that attached the camera circuit board. One is the LCD and the other is button/SD flash board; both of which are attached to the back half of the camera's case. Remove the back case and swap out the LCD and reattach everything in the reverse order of dissassembly.
Repair cost 75.00 and contact [email protected] for help.
185 views
Usually answered in minutes!
×