Color and brightness problem

There might be a problem with the flex wire connecting the screen to the Circuit Board or the screen itself is defective. Sometimes it is the docking of this connector which might became loose over time.

You will most likely need both convergence IC's in your TV. Need a service call.

Look like your monitor is gone bad on you. I am not sure if you can get the parts you need. I would get another monitor form a friend and see if your monitor is gone bad. if it is I would get me a replacement. in the long run you will save some money.

hello,
That T-con Problem. Not only bright or blur, mostly picture like polaroid.
Open the back cover, you will see pcb attached on panel.
Fine label of panel, exp : V315B1-L01.
You can buy it online.
Good luck.

Unfortunately, the Game Boy color has no backlight, so there's no way to make the screen any brighter. You can change the contrast, but that will only affect how dark things appear on the screen. Sorry.

Please open its cover and re-insert its CCD assy flexible cable it is loos thats why purple and greenish color appear. Its part no and description is 1-860-194-11 FP-854 FLEXIBLE BOARD

The optical block is going bad. Contact Sony support and have your model and serial numbers handy. Sony sometimes warranties these even after the 1yr factory warranty.

You can set these controls to your liking, though a lower brightness setting might increase the life of the screen. First, set the brightness and contrast to a level that is pleasing to the eyes, then adjust the color to look realistic - enough color without being disturbing. If faces area look greenish or purplish, then also adjust the tint (sometimes called Hue) until you get accurate flesh tone. Flesh tone is the best thing to adjust for; when you get good flesh tone, the rest of the picture will look great. ALWAYS make adjustments during a live news broadcast, which tends to have the most accurate balance of brightness, contrast, color level and hue. Note that commercials are all recorded in different studios with different settings, and will usually not look right - it's best to just live with this than to constantly readjust the TV. There are also DVD's available which walk you through proper TV adjustment.

You have a bad optical block, the block has a 2 year warrnty but you will have to pay labor to have a tech change it

They should be adjusted to set voltages. however it is best to shut the color level to the lowest setting then try t balance the screens to achieve the best black and white picture. then turn up your color level. Your brightness level should also be set to 50 % then when you adjust for the best B&W picture. You will have better color and brightness when you reset your color and brightness levels. Hope this helps.