If you pull the knobs off, you will find lock nuts under them. You could tighten them up. See if the knobs have set screws on them to lock them in place before pulling them off. On Allen & Heath, I don't think they do but, just in case.

Mar 21, 2014 | Allen & Heath Xone:92 DJ Mixer

1 Answer

Allen & heath xone 42 fader problem channel 1

Hello,

Carbon track on fader 1 is open because of wear or just broken, if you are getting sound then the ground carbon track is out but certainly the problem lies in the pot.

Nov 04, 2013 | Allen & Heath Xone:42 DJ Mixer

1 Answer

Only half the volume on the left channel of the mixer. Why? :(

Does the left meter do the same thing? If the meter matches the right one, I would suspect the volume potentiometer on the powered speaker. Try exercising the volume knob. There might be some oxidizing on the potentiometer.

Oct 25, 2017 | Allen & Heath Xone-22 2 Channel Dj Mixer

1 Answer

I have an allen and heath Xone 22 Mixer. Its great, except due to the lack of a power switch I pulled the ac adapter/power cord out too many times and now it has a really bad, loose connection. It works,...

Usually the connector that is board mounted is the problem. I would OPEN the unit as there may just be broken solder at the connector inside. If the connector requires replacement, find one at Digikey.com by searching for "power connector coaxial".

Hint: In the future install one of those little lamp switches that are in a little plastic box with knurled knob sticking out the sides. ONLY break ONE wire from the adapter to avoid getting the connections reversed. Since the wires are smaller than lamp cord, tack solder the wires to the piercing points of the switch .

Apr 11, 2011 | Allen & Heath Xone-22 2 Channel Dj Mixer

1 Answer

I am looking for a service manual for and Allen Organ model 301B. I am having trouble with the capture system, The manual pistons set just fine but the general pistons will not set when you push one all...

Have you tried contacting them here:http://www.allenorgan.com/www/company/service_support.html

Nov 13, 2010 | Allen & Heath Xone:92 DJ Mixer

1 Answer

Mic section, lights and filter section quit working

Sounds like it MIGHT be a power supply problem. Needs service!

Aug 27, 2009 | Allen & Heath Xone:92 DJ Mixer

Not finding what you are looking for?

View Most Popular

Music

My light is flashing on the LFO Filter, On my Allen&Heath xone 32 mixer! is this a normal function? as I only just bought it second hand and don't use the LFO Filter I don't know if a repair is needed

The Music

Open Questions:

0 Answers

I have an Allen & Heath Zed 24 (about 8yrs old) with an intermittent drop in signal level in ch1. It's only ch1 as I've tried to recreate it in other channels but they are all fine. Any ideas?

Jul 26, 2018 | Allen & Heath Music

0 Answers

I have an Allen & Heath xone 42 mixer and I am seeing a problem with my headphones when plugged into the mixer. When they are plugged into either the large or small socket, the right side of the headphones is a lot louder than the left. The headphones definitely work as I have tested them on other devices. I'm also pretty sure that I have got all the right buttons pressed etc. Anyone know what this might be and how I can solve it?

Jul 25, 2017 | Allen & Heath Music

Ask a Question

Usually answered in minutes!

Are you an Allen & Heath Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Allen & Heath Music? Or just drag it here!

My A & H xone 32 has just stopped working?? wont turn on? any ideas??

Add Your Answer

Attachments: Added items

Related Questions:

My light is flashing on the LFO Filter, On my Allen&Heath xone 32 mixer! is this a normal function? as I only just bought it second hand and don't use the LFO Filter I don't know if a repair is needed

I get a static buzzing noise out both speakers. it stops if I hold the plug cable or master out cables? turntable wires are grounded. help!

I have a lx1200h head, today i turned on the amp, lights came on, no sound from the cabinet..i plugged in the headphones, worked fine, then unplugged the headphones now the cab has sound. any ideas wh

CHANNEL MONTIOR LIGHT WILL NOT STOP FLASHING

Filter Knob and Buttons move from left to right

Allen & heath xone 42 fader problem channel 1

Only half the volume on the left channel of the mixer. Why? :(

I have an allen and heath Xone 22 Mixer. Its great, except due to the lack of a power switch I pulled the ac adapter/power cord out too many times and now it has a really bad, loose connection. It works,...

I am looking for a service manual for and Allen Organ model 301B. I am having trouble with the capture system, The manual pistons set just fine but the general pistons will not set when you push one all...