My RAZR will not come on or do anything at all. It is an unlocked model that I have been using in Bahrain. I went home on leave (to the States) and bought a Cingular chip to have a stateside phone # while on leave which I did last year with a different unlocked motorola phone with no problem at all. My RAZR was working fine, good signal, full battery etc when I went in to get the new chip. After I switched the chip it wouldn't do anything at all. It won't even turn on, keypad flash, nothing. At the store we tried plugging it in, and even switched the battery with a brand new one with no effect. I put my Bahrain chip back in and it still doesn't do anything. It wasn't dropped, submerged, splashed or anything - it just quit working. PLEASE HELP!!
Man... it's a software and hardware problem... go to your nearest cervice center and they will fix it up.... 1st your problem is they have to check your firmware . but what i'm sure of is,, your going to change the flex, it's the ribbon part of your fone connected to the main board to lcd......tnx man...
Posted on Apr 16, 2008
http://www.theunlockspot.com/motorola-razr-v3/rs10wp9/60 views
Usually answered in minutes!
Have the same problem. Please help!
I bought a Motorola Razr V3 UNLOCKED for my mom off of ebay we cannot get it to turn on.
I have tried to charge it, sim card is in, battery is in and it is in spanish we can't undersand what it is saying it also came from Kentucky. What do I do?
×