Question about Palm Tungsten E2 Handheld

1 Answer

Wi-fi I recently purchased a wi-fi card from the palm web site that was compatible with my e2. I followed all instructions and installed the software. I am able to find my wireless network and receive a strong signal but when I try to get on the web it immediately tells me that "cannot find requested page." It also says that the site I am trying to access may be down or that the URL I typed cannot be resolved and that I should try back later. I know that the web sites are not down and that I typed the address correctly. Can anyone offer suggestions?

Posted by Ralph Anders on

  • cadz2 Dec 04, 2007

    I have an e2 for the past two years. For the past year I have not been ablr to use the wi-fi. When I try it, I get this message:

    Fatal Alert

    SystemMgr.c, Line:6714,

    SyslinkerStub(): Failed to load the shared library.

    Can someone please help. Thanks

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Try a ping test from your router(should be under a status tab or something) and if that works then go to the prefrences, wifi, info(conect first!) edit network, details, advanced then enter a custom ip ie 192.168.0.2 just copy the first 3 sections of the ip address of your router and add a number greater than 1 after and enter your routers ip address for the dns server.

Posted on Apr 29, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How can i us wlan or wifi on my desktop

Most older desktop motherboards are not set up with Wi-Fi capability, the fastest, easiest and cheapest way to add Wi-Fi to your desktop is to purchase a USB Wi-Fi adapter.

I've used the Panda Wi-Fi adapters (Available online, such as Amazon.com) or pretty much any computer store).

Examples:
Amazon com Panda 300Mbps Wireless USB Adapter Windows Vista 7 8 8 1 10...

Amazon com Panda Ultra 150Mbps Wireless USB Adapter Windows XP Vista 7 8 8...


An alternative would be to purchase a wireless NIC card to install into your Desktop PC. You would have to examine your PC to determine what form factor and technology to purchase that would be compatible with your motherboard and available expansion card slots.
0helpful
1answer

Connect to wi fi

Follow the instructions given in the Kindle Support web site for how to connect to WiFi - there is a video demo on how to do this too on the same web page.
0helpful
1answer

My pc details-amd semprom 3200+,mmx,3DNOW,1.8GHZ. MY INTERNET SEVICE MODEM IS WI-FI ENABAL,BUT MY PC IS NOT WI-FI. HOW ITS WI-FI CAPABLE NOW

You must purchase a Wi-Fi adapter (possibly a USB Wi-Fi adapter) & follow the the adapter's installation instructions followed by inputting the modem's SSID & passphrase (if there is one). The SSID will probably show up in a list of available networks. Just follow the adapter's instructions. Refer to the modem's instructions for logon information (i.e., SSID, encryption type (if any), passphrase (if any), WPS PIN # (if any), etc.).
1helpful
1answer

Can I use my ATT air card with my Toshiba Portege M200 tablet pc?

I have owned several tablet PC's and all of them (including my most recent Toshiba) worked just fine with the existing wi-fi card. Please be clear, however, that AT&T wireless air card service and "wi-fi" are two different things.
Your AT&T card pulls internet service over cellular connections, and your wi-fi card connects to a local hot spot (if available) or your own wireless internet access.
First of all, be sure that you have an active AT&T laptop connect account and then follow these steps:
Power on your laptop. Insert the AT&T wireless air card into an available USB slot. Wait a few moments (this may take several minutes some times), and the card will typically start attempting to install itself and its software. If you have any trouble with this, ATT provides free installation tech-support at the following site:
http://www.wireless.att.com/businesscenter/solutions/wireless-laptop/modem-cards.jsp

You may also have them contact you at your convenience by going to this page and filling out the form:
https://www.wireless.att.com/businesscenter/b2b/contact_us.jsp?wtLinkName=ContactATT&wtLinkLoc=RN

Hope this helps!
Jeff
0helpful
1answer

Can Palm TX, E2 and z22 all use the same program

You might just have to upgrade the desktop software to work with the TX.  You can keep your names and addresses but you have to check with each program to see if there compatible or not since the TX uses Palm OS 5.  Most of the software available today is written for that operating system.
I don't believe Palm is even supporting the E2 anymore.
0helpful
2answers

Expansion card

Has this card worked before in your Palm?
0helpful
2answers

Tungsten e2 wi fi card

this weblink might help you

http://www.palm.com/us/products/handhelds/e2/

Easy wireless connections
Bluetooth wireless configuration is easy, quick and intuitive. Use the Bluetooth Manager as a one-stop-shop to configure wireless connections for HotSync, Internet access, text messaging or to dial phone numbers from Contacts.


Synchronize wirelessly
Transfer information from your handheld to your Bluetooth-enabled computer from across the room. Anything you can sync via cable or cradle you can sync wirelessly – Contacts, Calendar, photos and documents.

Send email and access the web1
Browse the web with the Blazer® web browser and access your email with the VersaMail® email client. Simply connect your handheld to a Bluetooth equipped mobile phone, or a Bluetooth equipped laptop connected to the Internet.
0helpful
1answer

Wi=Fi connection

Hello
First question is do you have a wireless router connected to your internet, and if yes, you may need to tell your router to broadcast your ssid. Instructions differ on how to do this so check the manual for the router. Hope this helps.

0helpful
1answer

Are the programs on my palm 505m compatable with the tungsten e2? I am thinking to purchase a tungsten e2.

I have purchased 2ea. of the handhelds over time, and used them since 2005. They are reliable. I would recommend you purchase a Aluminum case to protect it.
0helpful
1answer

Newly purchased palm tungsten E- turns on by iself and tries to connect to wi-fi, won't let you cancel, and then dies and needs rebooting several times. I have deleted previous programs that were on last...

The Tungsten E does not have Wi-fi. It doesn't even have Bluetooth (the E2 has Bluetooth). You've clearly got something on there that belongs to a different model.

There is a program called "Filez" that will let you take a look at each individual program on the device. The ones that are on ROM are marked by a chip. If you find one that is both in ROM and RAM, the one in RAM may be the problem.

Look on http://www.palmgear.com for Filez.
Not finding what you are looking for?
Palm Tungsten E2 Handheld Logo

Related Topics:

234 views

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Brad Brown

Level 3 Expert

18829 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...