We just purchased a 42" Vizio and when we first turn on the tv, the picture is green. Once we change the channel, we get a great picture. We tried it on different stations but they all start out green. Any suggestions???
Thanks in advance,
Emilie, I have the same issue. I have to press the input on the TV to go through all of the inputs and whenI get back to HDMI 1 it usually goes back to nomral - but sometimes that doesnt even work. I tried calling support, but waited 40 minutes and hung up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you tried to unplug everything from your TV for a minute or so and changing the batteries in your remote? I had that problem once. After you do that, try to turn on the tv only with the remote and change the channel. If you are using more than one remote (i.e. a comcast cable remote and a tv remote at the same time the signals cross).
tuner/decorder is gone out you would need to purchase a new decorder board for this. Try hooking up something on the scart connections and diagnost the tuner but if it does not change channels and its not turning off you got a problem with the decoder/tuner board.
Try pressing the MTS button on your remote while on the channel that does not have audio and select stereo. Most likely this will be set to SAP (secondary audio programming) and there is no SAP programming on that show. This is not something that could be avoided. It was during the channel scan, it locked in the SAP audio broadcasts for some reason.