Re: Nikon D100 shows # of pictrues left - on the display...
This is normal. Page 17 of the D100 manual says when the main battery is inserted the display will show the number of exposures remaining. If no CF card is inserted it will show E.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your camera's current version is displayed when viewing an image and you have selected the image data display. The latest version is 2.00. If you don't have 2.00 and want it, please see
http://www.nikonusa.com/fileuploads/firmware_upgrades/d100.html
The reason the mirror is acting up is because the Shutter is going bad under slow shutter speeds. > The motor which drives the shutter charge and the mirror up and down is the same .
I had the same problem and thought I had looked closely at the pins in CF slot but after finally taking it to a repair shop, the tech showed me a bent pin. It really wasn't that apparent first time around. He told me its a common problem as long as they use the CF cards. I had the pins replaced and my D100 is working great. Best of luck.
If you have a "r03" display, then you need to go into your CSM Menu, and scroll down to CSM #4, and turn LONG EXP. NR to "OFF". When you are in Noise Reduction Mode, your D100 buffer is literally cut in half.
×