Remote Where would I find a new remote for the Yamaha RX-V540 ?

RAV290 does not communicate with the yamaha rx-665 av receiver. Why ?
(1)Remote ID does not match with your amp ID. You should download RXV665 service manual to check the remote ID.
(2)remote diode does not work. Use your mobile phone camera to check it
(a)pointing the phone camera to the remote diode.
(b)don’t take any photo.
(c)when remote appear on the phone screen, press any remote button.
(d)If white flashing light is shown, remote diode is OK. Otherwise bad diode or low battery.
(3)receiver sensor diode gets defected.

Joseph, codes 0081,0082,0176, 0186, 1176, the attached manual may have more codes.
Yamaha rx-v2500 receiver, try the auto programming feature on your remote to set up universal remote. It is possible the remote may not support your equipment and you will have to replace with compatible remote. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
RC Yamaha RX V2500 Receiver and DVR PVR 5 HELP
Codes for Universal Remotes Codes for Universal Remotes How to Program Universal Remote
Yamaha RX V2500 Owner Manual Setting Remote Control Codes

RX-V540 - RX-V - AV Receivers - Audio & Visual ... - Yamaha

usa.yamaha.com > ... > AV Receivers > RX-V

Yamaha CorporationRX-V540. Discontinued. Natural Sound Home Theater Receiver. 0.0. (No reviews) ...The RX-V540 is a full-featured home theater receiver ready for all formats. .... their favorite stations or to have musical genres, such as all the jazz stations,

No sound on yamaha rx-530 stereo fm receiver - Fixya

www.fixya.com/.../t25422640-no_sound_yamaha_rx_530_stereo_fm

Feb 13, 2015 - no sound on yamaha rx-530 stereo fm receiver nothing,just no soundcomming out of speakers ... Does your TV have any audio outputs such as RCA perhaps? .... Suddenly no sound is coming from my speakers except for my subwoofer. On certain settings some of the speakers work but not all of them.

Most Yamaha receivers have a remote ID so if you have more than one Yamaha you can control one without bothering the other, do you still have your owners manual? If not have you tried the people at Yamaha they are very helpful with a problem like this but for an example I have my Remote ID set at ID1 because I do have 2 Yamaha receivers the RX-V1300 and the RX-A3020, see if you can find the section in your manual that talks about remote IDs and let me know if that fixes the problem and you can always goto http://usa.yamaha.com/products/audio-visual/ but that is the site for the United States they do have sites for many countries at http://www.yamaha.com/

I’m happy to help further over the phone at https://www.6ya.com/expert/glenn_3b3dd885737c06f6

Go to "menu/Setup/Speaker level" and adjust the balance of L-R.See page 21 of the manual:
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v540/?mode=model

Since it lacks a PHONO preamp, get one.

eBay always has some...
http://shop.ebay.com/?_from=R40&_trksid=p3984.m570.l1311&_nkw=phono+preamp&_sacat=See-All-Categories
http://shop.ebay.com/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=phono+preamp&_sacat=See-All-Categories

The model is RAV250 (roiginal) or RAV254 (sub)

Read this first:

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12987331024191

Searched eBay, found a couple RAV254's for $35 and $43 ...

"rx v450 remote" check the 'include description' box

or ...

$54
http://remotes.com/remotes/servlet/rs?&o=c&o=c&a=Search&uid=0&m=rx+v450&uuid=A12987330771381

If it's still sufficiently loud, why bother replacing it? Our hearing is subjective. Do all sources exhibit a lower level than you remember? If not, what's unique about the audio signal path for 'movies'.

Try this advice:

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641

"Dead" Remotes Can Be Saved

How to Re-Start Your "Dead" Remote Control

This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!

If that doesn

it can be accessed via the main unit controls but you need to go through your manuals. Maybe you can get your remote repaired still... maybe not badly damaged caused by corrosion.

[email protected]