Printer printing very small

Printer heads clogged or cartridges are empty or defective.

Please reinstall the driver and get it downloaded here : www.epson.com/cgi-bin/Store/support/SupportIndex.jsp
www.opendrivers.com/.../epson-free-driver-download.html

The Damage contact printing heads. More often this yellow colour. The repair is Required in service. The Special instruments and knowledge of the processing printing heads.

I have a CX9400Fax and occassionally print is mixed/missing lines. You must do a Cleaning cycle usually at least 4-6 times or until it prints a clear pattern. It will use LOTS of ink during the cleaning cycle. The printer normally uses a lot of ink, my solution was to purchase a CISS system along with a Waste Ink Container. IMO the best CISS is sold by the company below. I did have to call for tech support once and they returned my call in 30 minutes, problem solved and never came back. I purchase refill ink and it seems that I do a lot less cleaning cycles.

http://www.inkproducts.com/ink-store/

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Epson printers will not accept continuous ink cartridges. That is why you are getting blank pages. I recommend just buying the ink cartridge as you need them.

Good Luck

refix your ink cartidge then try.

ink might have dried up, plz try with new one

try uninstall your printer and then install it again.....