HP PSC 1610 Language reset

The way was hidden somewhere in the HP solution center:



1. Press the cancel and power buttons at the same time, while the printer is on.

2. Press the blue, green and gray buttons (in this order)

3. Change the menu options with grey button until you get to the "Resets" menu.

4. Press OK. "Country and Language reset" displays.

5. Press and hold OK for approx 2 seconds, then release. The printer will turn off.

6. Start the printer again - it should ask you to select language.

Hi,

Hopefully you have a setup button, press this and navigate to preferences, select this and select set language & country/region, hit OK, english should pop up, hit OK again, hit OK for yes, USA should pop up, hit OK, hit OK for yes & this should take you back to set language & country/region menu. From there just keep hitting left arrow back to the display screen and you should be done. This is how it is done for mine, hopefully there is something similar to this for yours. Hope this helps.

If this does not help, the only way to setup English language is to do reset on the printer. By doing the reset, the printer will loose any settings you have already set in the printer ( does not affect any PC/software settings )

Steps for Reset
Disconnect the power cord from back of the printer ( while the printer is powered on )
While holding the power button and cancel button front panel, connect the cord back.
The printer will go through alignment process. Complete the alignment.
*Note : Doing this reset, you will loose any fax logs or settings set on printer

The printer should work fine. If the issue does not resolve, it could be hardware issue.


* Please rate this solution with Thumbs up and comment to help us improve providing support

Follow these steps to change language setting on the printer display :
1.On the printer control panel, press the Left arrow twice or the Right arrow seventeen times on the Menu button until SELECT LANGUAGE? appears on the printer display screen.

NOTE: If the language is currently set to a language other than English, the Select Language? menu option will appear in that language.

2.Press the OK button.
3.Press the Left or Right arrows on the Select Photos button until your desired language appears.

NOTE: Even if the printer is currently set to another language, the name English will appear in the English language.

3.Press the OK button to select the language. A message requesting confirmation of the selection will appear appears. If the correct language is displayed, press the OK button. If the incorrect language appears, press the CANCEL button and start the selection process again.
4.When the SELECT COUNTRY/REGION? setting appears on the printer display screen press the OK button to continue.
5.Press the Left or Right arrows on the Menu button until the desired country/region appears on the printer display screen.
6.Press the OK button to select the country/region.

1. Press Setup until Preferences appears (4th or last option), and then press OK.

2. Press right arrow until Set Language & Country/Region appears, and then press OK.

You are prompted with a list of languages. You can scroll through the list of languages by pressing right arrow or left arrow.

3. Press OK on the appropriate language.

4. When prompted, press OK to select Yes or Cancel to select No.

You are prompted with a list of countries/regions for the selected language.

5. Press to select the appropriate country/region, and then press OK.

6. When prompted, press to select Yes or No, and then press OK.
You can confirm the language and country/region by printing a Self-Test Report,as follows:

1. Press Setup until Print Report appears, and then press OK.

2. Press until Self-Test Report appears, and then press OK.


Verify the result

:) Dr Tony

follow this steps Go to Menu > Maintenance > Set Language & Country/Region > Press Start for English > hope this helps

Press setup button and use left arrow one time
set ok
Press right arrow for four time
set ok
press left or right till ur language displayed
press ok to set your language. Most probably English

Press the Setup button until you see Preferencias and press OK. Press the right arrow until you see an entry with Lenguas in it and press OK. Use the left and right arrows to scroll through the languages and press OK when you find the one you want. When prompted press OK for yes or Cancel for no. Use the right arrow to select the country/region for the language you selected and press OK. When prompted, press the right arrow to select yes or no and press OK.

I would chat with HP, they should have one availible to walk you thruogh the change. UNLESS, you can read enough of the screen to change idioma [language in spanish?]

hmm okay hun
how did they change it from the printer
or from the comp?

Reset the language to English using Language and Country in the Maintenance menu.


http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu04814&lc=en&cc=us&dlc=en&product=57769&rule=29261&lang=en