Question about Labtec Webcam Pro

2 Answers

Background Noise I've just got the Labtec Webcam Pro and am strting to think there is something wrong with it or else i'm being daft somewhere. When i bring up the audio settings on the control panel then to begin with everything is alright. The audio bar moves up and down as i speak. Then after a while, even if i'm not speaking, it moves to about 3/4 of the way along the bar and is constantly at that point. It's as though it is picking up background noise even though there isn't any. If i try recording while its like this i can't be heard it just sounds like a tv when its not tuned into a channel.If i'm talking to someone on messenger then we have to hang up and disconnet every couple of minutes. This fixes it to begin with then it suddenly goes again. Any ideas would be greatly appreciated.

Posted by Mark Hillyard on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I got the same problem in skype.
I'm wondering whether this solution has helped anyone so far
and if so, what did you actually do, as the instructions above are kinda vague

Posted on Apr 12, 2008

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

First update your sound drivers if not already. If you are using a laptop, dissable the inbuilt microphone as this causes echo and feed back. Click Start>Run, then type 'dxdiag' to check that there are no audio or video conflicts. Ensure that the audio and video has been set up in messenger as well as with the provided cam software. Upgrade to windows live also, if you haven't already.

Posted on Jan 03, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

No puedo instalar mi camara web lactec pro en el windows 7

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764 ve ahi y baja el driver para windows vista, debe ser compatible con windows 7.
0helpful
1answer

Where can I get a download for Labtec Webcam Pro

The software for the Labtec Webcam Pro can be downloaded from the link below. It is the last one on the page and you will need to select the desired operating system and language.

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

0helpful
1answer

I need to update my labtec webcam/mic driver to work with windows 7 can this be done

First check the labtec website to see if they have a Windows 7 driver for it.
If not, it might be that Windows 7 supports the webcam directly, but I guess you have tried that.
Last option is to look for a compatible webcam driver for Windows 7 which is not from Labtec. This is possible since Labtec uses third party webcam components. Try using a driver finder application for that.

2helpful
1answer

Drivers for labtec webcam pro to windows 7?

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

Not sure about Windows 7 - you may have to download a previous OS and run the cam in Compatibility Mode
0helpful
1answer

I am having problems installing my rocketfish webcam on my imac. HELP

i don't think its compatible with imac but i might be wrong contact labtec tech support they should be able 2 help u there. hope helps :D
0helpful
1answer

Problemtoinstall with Windows 7

I could not find the Windows 7 64-bit drivers on Labtec website. However, I would suggest to download & install the Windows Vista 64-bit drivers.

Here's how to download them:
1. Go to: http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
2. Scroll to the bottom of the page to the section "Software for Labtec Notebook WebCam, Webcam Pro, WebCam Plus, plus SE and labtec® webcam".
3. From the "- Select Your Operating System -" drop-down menu, select "Windows Vista 64-bit".
4. From the "- Select Your Language -" drop-down menu, select "English".
5. Click on the "download" button to start the download.
0helpful
1answer

LABTEC WEBCAM PRO WONT CONNECT ALL OF A SUDDEN

uninstall ...reconnect in a different usb location ..and try to let the pc find it...if not , find it via add new hardware from control panel ...and just click auto install
1helpful
2answers

Webcam problem /windows vista

WRONG .... i wish people did research before thinking they know everything ....... and its not Vista more of Labtec, with certain old usb labtec cams, they decided to stop all support on them, there fore the latest drivers from labtec for vista may mean it wont work. There are ways around it but u need to be lucky and find drivers which are version 6 or below first for it to work.
0helpful
1answer

Labtec Webcam PRO

hmmm...try this link..with your operating system info at hand.

got backup?
1helpful
1answer

Web cam is causing interference.

got the same -- horrible noise coming out of the speakers.
I connect XP to XP, with skype on both sides. One of the sides seems fine, but the other one (which is mine), gets this noise every minute
can anyone tell me why it is so?
Not finding what you are looking for?
Labtec Webcam Pro Logo

Related Topics:

99 views

Ask a Question

Usually answered in minutes!

Top Labtec Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Resolution IT Dubai
Resolution IT Dubai

Level 3 Expert

541 Answers

Rob Hill
Rob Hill

Level 3 Expert

1431 Answers

Are you a Labtec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...