I am having trouble with my Denon AVR-2106 unit. The unit will intermittently change its surround setting. For ex, I will set it to ?7CH Stereo? and after a while the unit might switch itself to ?Game? or ?Rock Arena.? I wonder if this is caused by too much heat building up in the enclosed stereo cabinet?? Or is there some other explanation?
Also, I have correctly wired my surround speakers (2 fronts, 1 center, 1 subwoofer and 2 rears) to the unit, but for some reason the only surround setting that activates the rear speakers is the ?7CH Stereo? setting. That seems wrong. Can you help?
If the surround back is turned on,on the receiver,then the 7CH stereo will activate
the 2 rear,but if it's off on the receiver
the 5CH on the remote will do the same.
I don't know much about the unit changing from 7CH to game,rock Arena etc.that i know will happen if u press the DSP simulation found
@ the 3rd. top right button on the remote.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check your speaker wires on zone 2 and look inthe manual for speaker configurations with zone 2. you may have a speaker conflict. If you still have an issue, post a comment with your speaker setup and I'll help some more. Hope this helps
THE BEST SOUND IS WHAT SOUNDS BEST TO YOU, HOWEVER DO THIS:
1, USING THE SETUP MIC CONFIGURE YOUR DENON, PAGE 8 OF THE MANUAL. NEXT
2. RAISE THE REAR SPKR LEVELS, PAGE 46,47. NEXT
3. WHEN LISTENING TO AUDIO CD OR RADIO TRY THE 5 CH STEREO DSP MODE.
4. WHEN WATCHING A DVD USE DSP DOLBY PROLOGIC OR TRY 5CH STEREO IF THE MOVIE IS MOSTLY TALKING.
5, TRY 5CH STEREO WHEN WATCHING PROGRAMS WITH MOSTLY TALKING
I have a Denon AVR-3000 and want to turn on the B Speakers. I have hooked up my subwoofer to the B connections on the Denon since there is not a subwoofer connection. How do I turn the B speakers on without a remote
So you have no sound on any Inputs? This makes a difference, if it works on some inputs but not others. For a factory reset - turn the unit off by the ON/OFF button (not the standby button) hold in the SPEAkER A & B buttons at the smae time, while pressing them turn the system on by the ON/OFF button, wait about 3 seconds and the unit should reset everything.
Does it still power up for a little bit or so with no sound what so ever?....I there is no dents in it or metal pushed in causing cracked connector boards....I can take it off you hands for a couple parts I need ...because your transformer and 2 resisters are shot and it will cost almost as much as the unit cost's.
I do have a brand new never opend $649.99 Denon AVR-788 for $365.00.
And 2 used AVR units Denon and Onkyo.....ALL HDMI