I dont know the combination for a supra keysafe that is on a door of a property I have just purchased

RUSH BACK TO THE STORE WHERE YOU BOUGHT IT. The only one who can give you safe code is the one who sold it to you.
As if it has a default code? Electronic cosdes might be reset but of sourse, you should know the original.

https://www.youtube.com/watch?v=_tqTp57YfCw

http://www.safeoptions.co.uk/blog/how-to-change-number-on-keysafe-lock/


In any case, if someone with experience with a safe similar to yours might be interested to share his experience, you should provide make and model of you unspecified safe.

I've been lookin for safe mnauls on internet and got this one:

http://www.sargentandgreenleaf.com/pdf/630-302_6120_op.pdf

and also this one:

http://hilkab2b.co.uk/manuals/s-25ea%28ii%29.pdf


How To Change Number On Keysafe Lock Safe Options


Guses might find some better information should you provide make and model of your safe.

Setting the Combination
1. Remove the key holder from the KeySafe by pressing the RESET button, followed by the OPEN button. Pull down on the key holder from the bottom of the KeySafe
2. Remove the bracket. Press the Release tab on the bracket and slide the KeySafe upward until it is free of the bracket.
3. Remove the plastic card attached to the bracket. You will see ten numbered buttons with arrows. These numbers correspond to the numbered buttons on the front of the KeySafe. An up arrow indicates that the button is not selected, a down arrow indicates that the button
is selected as part of the combination.
4. Using the screwdriver tip on the plastic card, apply light pressure
to rotate the arrows on the buttons you've selected for your combination a half-turn to the downward position until it snaps into place. Caution: The arrows must either point up or down, with downward arrows representing the numbers in your combination. If any arrow is pointing left, right, or is not fully seated when turned downward, the combination will not work. Improperly setting the combination is not covered under the warranty.
5. Return the plastic card to the bracket for future use

see if the current combination is 0-0-0 as sent from the factory
once you find the combo use a pin or other to depress a button where you can choose another combo
or try here
http://www.ask.com/question/supra-lock-boxes

Salam Fahad, What exactly do you need to know? The Toyota Supra is much the same as any other vehicle to drive. Shalom John

HelloWhat is the problem with the power supply SMPS to your Supra combo. Give some more details please.

I have just moved into a house that has a supra combination code key safe mounted on a wall outside the back door , it was put there by the first owner who died ,the second owner never used it and don't know the code,I just thought it would be handy to use as we are going away in June to France and its away of leaving a key in case the alarm goes off while away so a neighbour could deactivate it or the police so they don't have to brake down the door or if I get locked out I could have that key for emergencies so is there a way I could find the code for the safe please?

Get some heavy duty penetrating oil and spray in all the crevices. Remember right 3, left 2 then last number. If it's one of those 4 digit dial in locks be sure to push in then pull out to open. For a better answer post a picture.

dont think 89 model uses security code so answer is yes

hmm. . . . go to tuner shops. . . for sure if they dont have one they can order 1 form japan. . . it maybe an aftermarket clutch but why not. . . they last longer. . . 8)