My camera has worked fine for a few years. Recently I tried to use it, and the display showed the message "card full". I tried another card, and got the same result, so I deleted several images (from both cards) and the result was still the same "card full" message. These are 8MB and 64MB SmartMedia cards, which work just fine in the reader on my computer. Any advice would be appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
At first, you have to find out the manual of your camera to see that if your camera can support a 16GB memory card. Not all the cameras can use a large memory card, as there is some limited maybe have been written in the camera manual.
No, that camera works with the 2gb cards just fine. You will want to try to format the card in your computer first, then try it in your camera (format it in the camera before using). If it doesn't format in the computer, it is a bad card.
I would give this software a try: http://www.download.com/VirtualLab-Data-Recovery/3000-2248_4-10610841.html?cdlPid=10801131 and be more vigilant about backing up your pictures. Flash memory can corrupt at any time. Good Luck.
Yes they can and do go bad on occasion. But before throwing it out, attempt to format it in your camera. Find the menu selection that allows you to do a "full" or "low level" format, NOT a "quick" format. If the card still misbehaves, then it's time to retire that card.
i think you have broken or bended any of the pin inside the card slot, and that is creating problem. Try looking in the card slot you may find any of the connector pin broken or bended. Try straighten the pin cautiously and may your machine start working .
you can try it with a card reader or you can take help of other camera in your group compatible with your memory card type.
get the help of other olympus camera and then format your card in that and then try the card in your camera simple....
i hope it will be fixed....