TECHNICS SC-DV250 can anyone tell me where to get replacement cassette deck part no.rs-dv250 as some clown recently stole it and left the rest ??? cannopt get anywhere
my dvd and cd do not ply in the screem is said no playmy dvd and cd do not ply in the screem is said no play
AnonymousMar 24, 2014
How can I change to english and even watch DVD on my panasonic strada CN-DV250How can I change to english and even watch DVD on my panasonic strada CN-DV250
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The signal output from the turntable is very low and needs a special input which most modern sound systems no longer have.
You will need to connect your turntable to a preamplifier.
The output from this preamplifier then goes to the auxiliary input ("AUX") of your sound system.
A good starting page to look around for a turntable preamplifier is here: http://www.amazon.com/gp/richpub/syltguides/fullview/21PCGJR9SBLQP
Good luck!
The problem you are facing is that the record player audio outputs has a left channel, a right channel and an earth or grounding cable. If this grounding cable isn't attached, you are likely to get a hum sound. I would suggest buying a record player RCA (Ground simulating) cable or you will have to buy an inexpensive mixer that supports record players through which you can channel this record player. Once you have all these, just follow the white and red color coding to attache the right channel to the right socket.
The answer is simple if you want to listen to mp3 on your system and you purchased dv290 dvd changer you also need dv290 sound processor as they were coded - for example you have dv250 system with dv250 chager and sound processor you are only going to be able to see dvds and cds if you swap your changer to dv290 (plays mp3, audio ,wma and dvds) you also need to purchase dv290 sound processor as well - no need to change your amplifier or tape deck (the ribbon on the tape deck will be compatibile)
the lower end units were incompatibile with higher spec changers same when it comes to EH series if you have eh780 sound processor you are only going to be able to plug 780 changer or lower 760 770 etc... but 790 will not work with it unless you get 790 sound proc
there is not much to wiring them up, on back is ports for each speaker left right centre back bass or what ever. just make sure you put black to black and red to red or how ever it is layed out.
100 watts per channel both channels driven into 6ohm. You can download the owners manual at http://www2.panasonic.com/consumer-electronics/support/ (Technics and Panasonic are both made by the same company) Then enter your model #. the specs are on page 23 of the manual.
did you buy your system in adifferent region and moved with it to another? I heared something like some DVD players are region-locked. I could be wrong but google about region-lock... try this among others: http://dvd-player-software-review.toptenreviews.com/what-is-dvd-region-lock.html
my dvd and cd do not ply in the screem is said no play
How can I change to english and even watch DVD on my panasonic strada CN-DV250
×