Password Hi, someone put a password on my dvd player and now it is not working. can anyone help me figure out hwoo to take out the password?

Try using your remote, access the general setup menu and choose the Disc Unlock option.
Hope this helps!!

AMW V99 DVD Video Player with Remote

Region code hack posted by TR, December 19 2003:
This seems to work for the AMW V99 ($19 in after Thanksgiving sale at Best Buy)

1) turn on the dvd
2) open the tray
3) enter 9735
4) change the region code to 0
5) exit to main menu
6) password 8888

Best $19 I ever spent! (Bestbuy)

Futher confirmation the 9735 hack DOES work. Also gives options to adjust rating (I assume to control the maximum rating of DVDs allowed) and a PASSWORD option, I'm not sure what this is for. I performed the hack with the tray both OPEN and CLOSED.

Other hack posted by trickypuss, January 14 2004:
Dunno if anyone else has tried this, but I put a backup dvd created with DVDXCopy into my V99 after using the region-free hack mentioned above. It asked me to input my password (default is 8888) and then the movie begins playing off the dvd-r. Password is input with the remote, and there's no confirmation. Just banged out 8888 and pressed play. Previously it would just sit there when I put in the disk without asking for password or anything. Neato. So this explains one use for the password function.

AMW S99 / V99

1. Turn on the player (disc tray has to be empty)
2. Open the disc tray
3. Press 9, 7, 3, 5 (or 8, 5, 6, 1)
4. Select region (0 = multi-region)
5. Close the disc tray

I have a Mintek MDP-1880 player, and the manual says that its default password is '88888' Try that and see if it works. Hope that helps you.

The default password is 136900.

Hi there,

Regarding my problem well it look me a while but I got there in the end. What I had to do was type in a password which is in the manual at the back 136900 & after that the DVD worked. The only slight problem I have though now is that when I do wana watch a region 1 DVD its asking for that password everytime I put one on, as long as it works all the time I should be ok.

Thanks.

GRACIAS, THANKS, i've resolved the same problem , de defauklt password for all dvd philps player es 136900

Once I entered 136900 and press OK, it seems to be working ok. Anyone has any idea why it all the sudden asking for a PW? Thanks!

normally the default password on all electonic devices is 0000 try that it should work unless someone changed it

The best I can do for now is suggest entering 88888 as the password. This is the password as set by the manufacturer. If you or someone else has changed the password then I cannot help you. I do hope this helps.

3308 is the factory password default. I found it in the manual and it works!