Question about HP Color LaserJet 2550n printer + HP Color Training and extended warranty ;U4929E, Next-Day exhange...

1 Answer

HP Color LaserJet 2550n printer - Paper feeding fine. No print!

My HP Color LaserJet 2550n printer feeds just fine but the pages come out blank! I have all HP cartridges and toner is fine. The machine is working fine mechanically but each page comes out totally blank! None of the lights are blinking and I have rebooted everything several times. Can't find anything in the booklet that came with the printer on this subject. Appreciate any advice! Thank you! Bev

Posted by Beverly Parsons on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Have you checked that you are sending the print job using the correct paper tray on the printer? Check the properties of the printer to ensure you are. Check also that the printer is OK by running a test print from the printer and not through the PC. If I remember it's hold the green button for around 7-10 seconds, whilst powering on.

Posted on Dec 31, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why does the 2550n printer not printing fully in the left column

Is the print quality poor on left side for all colors? You may have one bad cartridge. Create a paint document with Yellow, Magenta and Cyan squares on the left side and see if one color prints better than the others. You can also gently shake the cartridges to redistribute toner.
0helpful
1answer
0helpful
1answer

HP Color LaserJet 2550N. Slow printing takes 16

http://www.hp.com/#Support

Follow the link and get the correct driver and get installed
1helpful
2answers

Jam in print paper path HP 2840 printer

does the paper feed at all(1/2 way) no feed,if not pick-up paper most likely will be feed motor if 1/4,1/2 or 3/4 fed will be sensor at falt or 2nd tray conectors dirty or making false contact.
0helpful
1answer

Our 4600 is printing blank.

You need to have the disengaging plate replaced. The part # is RB2-8239 if don't have experince with this machine I would recomend that you have a trained tech do it. It is a pain to do.
0helpful
2answers

Blinking yellow light

Hi,
I m not sure what the specification of the paper type you are using however if you are using card stock than you should use manual feed Tray and in the printer driver properties you should select paper type as Card-Stock to make sure there is no print quality issue.
1helpful
2answers

HP color LaserJet 2550n

Look at your printer properties and check that you are using the correct tray settings.
Not finding what you are looking for?
Office Equipment & Supplies Logo

446 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1122 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6358 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...