Error code 563 - OKI C5800dn Laser Printer

My 2005 Nissan Quest 3.5 keep stalling out want pull a hill how do u get it out of limp mode

• Code: 563
• Description: Pressure roller overheat 3 (software error)
  The detected fusing roller temperature stays at 230°C or more for 1 second.
• Causes: • Defective PSU • Defective BCU
• Remedy: 1. Replace the pressure roller thermistor (center). 2. Replace the PSU. 3. Replace the BCU.

Ricoh Aficio SPC430DN Error Codes List page 11 from 17

Esto dice que es posible que el Photo Conductor Unit Copier Drum es malo o el Color Copier BCU Engine Control Board es malo.

THE CARRIAGE FOR THE SCANNER IS FOULED UP WITH SOMETHING

Head 4 cyan reservoir did not fill within the correct time.

563 I usually drum code reset, some OKI machine have sensors in the side frames they look like a little round window, clean with Q tip, I will assume you have replaced the drum, right?

Try 0345 563 582 515 098 584 219 104 233 223 065 471
Grundig
FT70-700 822DOOFA MW82- 500IRDT ST63725 ST63755 TF55-302 GT210S. MW822699 CVC2030ST ST70-875
563
Grundig
T70-1021, T70-1022
065
Grundig
MW82701 ST55/730 MW70/2700
582
Grundig
GT1401
515
Grundig
T55-1120 T55-1020 WF703020
471
Grundig
32WF100 W82-2030
584

Changing the ink tube or the RFID chip on the ink tube may solve your problem.
PrntNow.com

IIf all you need is the code to put in your remote, the codes for Goodman TVs are as follows:

065, 064, 100, 285, 037, 292, 544, 207, 318, 363, 399, 402, 515, 527, 392, 402, 371, 245, 563, 399

sorry it is imposible to pin point the correct code without the tv here with me but here is all the possible codes one will 1000 percent work



0345 563, 582, 515, 098, 233, 219, 223

#pw+033 123 365 133 327+1# #pw+732 200 664 024 707+2# #pw+134 204 764 204 101+3# #pw+439 967 667 701 563+4# #pw+044 563 371 217 162+5# #pw+496 317 125 455 711+6# #pw+986 472 511 426 477+7# dial this codes