RCA HD52W56 52" Rear Projection HDTV Logo

Related Topics:

Question about RCA HD52W56 52" Rear Projection HDTV

1 Answer

TELIVISION MATSUI TV HAS POWER INDICATOR FLASHING AND WILL NOT TURN ON

Posted by MARK SMITH on

1 Answer

Anonymous

Unplug for 3hours this is a hard reset, if the prob is still there after pluging back in , listen real close two back of set, is there a squeeling noise, if so prob. a bad power board. about 300$ two fix SORRY

Posted on Dec 31, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My matsui m32lw509 TV standby light flashes once when i turn it on then it just stays blank nothing powers up ???????????????

These blinks (flashes) are fault indication. By the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be suspected. If you wish to get more details, check the site linked here. It has blinking codes detail to many brand TVs. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/
0helpful
1answer

Matsui m15digb19 USER manual

How to take the screen lock off a matsui 15in hd ready digital lcd tv with no remote as i can not turn my tv on
0helpful
1answer

I have Sony 40inch breviary. My tv is not turning on I reset tv but it still not working. Stand by light keep blinking but tv is not turning

Hello
Blinking of standby light in Sony telivisions are fault indications. You just count the number of blinks occur at a time when the set is switched On with its FRONT PANEL POWER SWITCH. Count it three or more times, and make sure about its number of blinks and inform me through Fixya. From that number, I can get into the fault section, sometimes more accurate to the location of the fault. Count it Keenly for at least three times and make sure before reporting. OK.
0helpful
1answer

The Blue power indicator light is flashing on my Matsui M22LID709 TV+DVD player and it never used to. I want to make it stop!!

Also had this problem. Click Menu, then timers and if you have any then delete them (I think it saves them from the past instead of automatically deleting them). Hope this helps.
0helpful
1answer
0helpful
2answers

Matsui TV/DVD MAT15LI618D DVD unlock

where can i get a power supply lead for my matsui 15in tv/dvd player
0helpful
1answer

Scott lcd tv does not turn on

This sounds like a proble with the unit's power supply in which case you could find a local tv repair shop and see how much they would charge to diagnose the issue.
0helpful
1answer

Telivision volume

sounds like a sticking tact switch. an engieer would isolate the sub-panel that contains the volume and the manual programme up/down switches and then operate the TV using the remote control and see if this eliminates the problem
8helpful
2answers

Matsui 4in1 remote control instructions

1) Turn on TV;
2) Press TV on the remote control;
3) Press and hold SETUP, until the red LED indicator blinks twice;
4) Enter 9-9-1-1 on the numeric keypad;
5) Press POWER on the remote;
6) If the TV doesn't respond, repeat #3, #4, #5.
Not finding what you are looking for?

236 views

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6650 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...