How to set accurian clock radio alarm - Digital Products International ILIVE IC308B DUAL ALARM PROTECTION CLOCK RADIO WITH DOCK Docking Station, Clock Radio FOR IPOD

Can you comment with the model number? It will be on the information sticker on the radio itself. It will possibly start with 'CRX-'.
Try this - Press and hold the alarm set button until the display flashes like your setting the alarm time. Click the same button again and it should swap between buzzer and radio each time you click it. It will probably show some sort of logo on the display telling you which it is set to.

Try manualslib.com, or MFG website, or their customer service email.

1. Turn on the radio
2. Hold down the "Clock" button. It will switch to clock-date setting mode.
3. Use the "Tun-" and "Tun+" buttons to adjust each field.
4. When one field is set, push the "Clock" button to get to the next one, and when all are set push it again to exit.

SETTING THE CLOCK TIME: 1. In standby mode, press and hold MODE to enter the clock time setting mode. 2. Press |<< TUNE/SKIP >>| to switch between 12-hour and 24-hour display. Press MODE to confirm the selection. The digits flash. 3. Press or hold |<< TUNE/SKIP >>| to set the hour and minute. Press MODE to confirm.

When in standby mode (press and hold power button to enter standby), press MODE. Now press |<< TUNE/SKIP >>| to set 12-hour or 24-hour display mode. Press MODE to confirm display setting. The display flashes. Press |<< TUNE/SKIP >>| again to set the hour, then press MODE. Press |<< TUNE/SKIP >>| to set minutes, then press MODE to confirm the time.

• i have a AM FM digital dual alarm clock radio. dont no how to set it there are nemders on the back of it.cr4004DT 0506098496

Ensure the radio/AUX/Ipod is off (hold down the power button)

Press & hold MODE until 12:H flashed. Use the TUNE/SKIP buttons to make your selection

Press MODE again to see the hours flash and again use the TUNE/SKIP buttons to set the hour

Press MODE again to see the minutes flash and use the TUNE/SKIP buttons to set the minutes.

Press MODE again and you are finished.

To set the alarm: Press and hold the ALARM button until the time flashes and then use the TUNE/SKIP buttons to adjust.

so you learn a lesson, the first thing to do is get the paper work together and pack it up and bring it back for credit. my advice is any time you decide to buy anything it is wise to go in the internet
and get a review of what ever you are buying you'll have a better
idea of what to buy.

use the selector switch on the top, switch it to wake 1 or wake 2. set the time that you want that alarm to go off. then push the switch all the way back to the left to deactivate it. then to activate the alarm, use the buttons on top labeled wake 1 or wake 2 to turn the desired alarm on. pushing that button repeatedly will cycle the alarm to either beep, radio, or it will turn that alarm off.

This clock has 2 alarms to set Alarm 1, switch alarm 1 to the "set" position and make sure alarm 2 is pushed to the "off" "radio" or "cathedral" position, press and hold the "alarm" button on top while pressing the "f.fwd" or "rev" button to set the alarm....to set Alarm 2, do the opposite of the set buttons and repeat...to set the time just hold the time button down while pressing "f.fwd" or "rev"...hope that wasn't too confusing.