Question about Olympus Camedia C-350 Digital Camera

1 Answer

Olympus Camedia D-560 zoom Problem

IS there anyoen that can tell me how to remove the guts of the camera from the casing without a rpoblem I believe I ahve removed all the screw but can't seem to separate the board from the camera. Any I ideas? TYIA Janie

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 114 Answers

To remove the outside case just remove the screws and pull hard, sometimes is glued, but don´t worry will not brake the case, inside u need to remove more screws pay attention for the board where the ccd is fixed.

Posted on Jan 19, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace battery in braun 5720


Braun Select Models Electric Shaver Disassembly Tutorial
1. Remove two screws on the bottom, where the power plugs in. Need to remove two ribber plugs first.
2. Pull from shaver head and remove shaver "guts" from case. (It will be hard to remove as it is encased in rubber to make it waterproof, but keep wiggling and tugging)
3. Remove old batteries and replace with new ones.
4. Re-assembly is reverse

Nov 08, 2013 | Braun 360° Complete 8985 Electric Shaver

1 Answer

Need to see dye gram how to remove gear box for dyner wide glide


On a Big Twin, you can remove the geartrain from the transmission case without having to remove the gearcase from the engine. Basically, the "guts" come out of the case.

You'll have to disconnect the battery, remove the clutch and all other inner primary gear, remove the exhaust pipes, drain the oil from the transmission. Remove the top cover of the transmission, remove the shifter cam mechanism, remove the "trap door endplate" of the right side of the transmission along with the gear.

A service manual is recommended if you plan on doing this job yourself.

Oct 08, 2009 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

SD600, the camera time resets everytime i turn it on. i read the manual and found out that there is rechargeable lithium battery built into the camera to save such setting. does any one know what type...


There's a little battery in the camera under where the tripod mount is. Make sure your camera is out of warranty before attempting any repairs. Opening the case will void your warranty. Do this at your own risk. 
1) Remove all six screws from the outside of the case.  2) You'll need to loosen the LCD panel, there are two little tabs holding the panel, and one screw up by the speaker (photo/movie/view) switch.  3) Remove the screw by the speaker, this will give you access under the LCD. Do not unhook the LCD cables.  4) Now under the LCD panel you should see a screw that connects the metal backplate with the tripod mount, remove that screw.  5) On the bottom, on the main motherboard, there's another screw holding the tripod mount in.  6) After removing the tripod mount, you should see a battery under the LCD cable.  7) On the main motherboard, gently (GENTLY) remove the large LCD cable and pull it through to the other side.  8) You should now see the battery pretty clearly.  9) Replace the battery. MS614X 10) Reverse the steps.  

Mar 02, 2009 | Canon PowerShot SD600 Digital Camera

1 Answer

I need a service manual for the Dimage z2 Digital camera


Hi,

Right, this is the info that you need. To remove and replace the battery door you need to follow 15 steps in the correct order, they are:

Remove the two screws (above lens) that hold on the flash cover.
Remove the flash cover
Remove the three screws on the view finder cover
Remove the view finder cover
Remove the two screws on the side of the battery compartment
Remove the two screws in the middle of the base of the camera
Remove the sliding cover on the left hand side of the lens
Remove the single screw on the left hand (curved) part of the camera case
Remove the single screw on the bottom left hand side of the casing
Remove the trim piece on the right of the camera next to the lens, the top has a sticky pad under it so will be difficult to lift up.
Remove the screw behind the trim plate
Remove the back casing

The flap should now be replaceable, if you do not feel comfortable with this then get a professional shop to do it.

Jan 21, 2009 | Konica Minolta DiMAGE Z2 Digital Camera

1 Answer

Shutter closed


Any small distortion to the case will jam the dust shutter mechanism, as will dislodged dust and dirt. Remove the battery and carefuly remove the case screws. DO NOT LOSE. Lift off the front cover, take care with the top control knob and on/off switch as there are dust shields that may tear. This reveals the dust cover mechanism on the front of the camera. Dust off with an air-duster or soft spotlessly clean (new) paintbrush. Check a narrow ribbon cable is plugged-in at the front as this powers the cover motor. Gently guide the case around the top rotary control & on-off switch and line-up the circuit board beneath the rotary switch. Do not force anything together. Lightly re-assemble without screws and insert the battery - you cannot make this test without the cover-on as the case supports the switches needed to control the camera. Check that the cover operates correctly or is jamming on the case cover at the front where the shutter moves. If all OK replace the screws, else gently straighten the case with your fingers. This has happened several times to mine and cleaning it/lightly straightening the case cover always make it work again.

Jan 30, 2008 | Fuji MX-1700 Zoom Digital Camera

1 Answer

Broken plastic top by power button


Remove two screws and then remove C-CASE-ASSY

5a08c50.jpg

Dec 10, 2007 | Casio EXILIM Card EX-S770 Digital Camera

1 Answer

Disassembly of case


This is for a Viewsonic VX900. The bottom bezel with the button unclips.Unplug the connector, and put aside. ( Dont pull on the wires) Then there are two screws that are removed, and the grey frame around the monitor comes off next. Then remove the 4 bottom screws, and the two top tiny screws and the LCD comes away from the back. Remove the shielding, and replace your components. Good Luck !!

Sep 01, 2007 | ViewSonic VP920b 19" LCD Monitor

4 Answers

Ebel Classic Wave fitting a new crown


i have changed the battery on my and my wifes ebel classic wave watch,,
step 1 ...remove the crown by pulling away from the watch, use your thumb and index fingernail and pull , it will come out
step 2 ...remove all 5 gold bezel screws
step 3... be careful,, the bezel/crystal will pry off easy
step 4... be careful and remove the entire face/hands/watch guts all in one easy step,, or just turn the watch over and it will fall out
step 5.. small screwdriver and remove/replace battery
step 6... reinstall watch guts/bezel and gold screws
step 7... push crown back into watch
step 8... take wife and kids to dinner ,,you just saved three hunderd bucks
if have done it many times ,, you can do it !!!!

Dec 10, 2006 | Ebel Classic Wave 9090F249725 Wrist Watch

4 Answers

Bust screen


On the S80, you need to remove the 6 screws accessible from the outside of the camera. at that point only the bottom half of the camera front comes loose. The thin black strip can be removed (gently) and at the top of the camera, dead center, is a hinge. carefully slot a flathead screwdriver into the hinge and you will feel is disengage. at that point you can take the front and back off the camera guts, and replace the lcd panel.
good luck and be gentle with it.

Nov 18, 2006 | Canon PowerShot S80 Digital Camera

5 Answers

How do I take it apart so I can re-solder the ear jack. I can't get inside it


Try this
http://www.gotzune.com/forums/showthread.php?t=9742

Jul 01, 2006 | Dell DJ MP3 Player

Not finding what you are looking for?
Olympus Camedia C-350 Digital Camera Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

594 Answers

Ekse

Level 3 Expert

13434 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...