Machine will answer but does not record the caller's message.
It maybe hardware issue. Make sure the recording DTAM chip is working. You can try to record your personal annoucement, to see if the chip still record message.
Posted on Jan 21, 2009
Recording Your Announcement
Before using this answering system, you
should record the announcement (up to
one minute long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a prerecorded
announcement: "Hello. Please leave a
message after the tone."
1 Press and hold annc/skip. The system
beeps. Speak toward the microphone
normally, from about nine inches away.
While you are recording, the Message
Window displays -.
2 To stop recording, release .annc/skip
The system automatically plays back
your announcement.
To review your announcement, press
and release .annc/skip
You can get a copy of your 1717 manual at this web site:
http://www.retrevo.com/samples/AT%26T-page-2-manuals.html
Hope this helps. Good Luck, Barb
362 views
Usually answered in minutes!
My answering machine says that the storage is full when calling the home number and wanting to leave a message. All of the messages are deleted on the machine. How do I solve this problem?
×