Sony Cyber-Shot DSC-P73 Digital Camera Logo

Related Topics:

Question about Sony Cyber-Shot DSC-P73 Digital Camera

1 Answer

E9101 flash error.

My sony cyber-shot suddenly stopped working and flashed E9101 and will not let me take a picture. Ive tried taking the batteries out, and the memory card and even restarting the camera, nothing is working, is there a way to find out what it could be without taking it to a shop? Also if i have to take it in to get fixed, how much would it run?

Posted by sarah Angela on

  • Anonymous Dec 04, 2007

    same problem.. i can still take picture but the flash isnt working... is der anything i can do..?

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 326 Answers

Hello Sayrah, there is no way you can fix it yourself. E9101 is an abnormality when flash is being charged. Contact your Sony dealer or local authorized Sony service facility. Best regards, Arpad

Posted on Jan 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

E:91:01

The problem is with one of the capacitors, Sony can replace it for you at a cost of $80. This error can come, if we click photos continuosly, the capacitor may get heated up. We need to give a gap of 3 to 4 seconds. Time to be given for the flash to get recharged after a click.
Just give a call at Sony help line. 800.222.SONY, they will replace the capacitor.

If its worth the cost, go for the repair, or you can use the device without flash by disabling the flash. At setup just disable the flash and this error wont show up again.
0helpful
3answers

Getting error E9101 with my w55

Hi,
The error shows that(Abnormality when flash is being
charged.) the problem in in FLASH UNIT, it needs replacement, the part number is given below according to the model number you mention DSC-W55 Part No. 1-479-663-31 Description (FLASH UNIT).
Thanks for using ifxya.
1helpful
1answer

Error message E 91 01

flash error for sony cybershot dscw55 ERROR CODE E:91:01 1st go to SETUP MENU then select the toolbox icon 1 then select "INITIALIZE" press ok, master reset then it goes back to normal

(DOWNLOAD & SAVE PICTURES BEFORE MASTER RESET AND KNOW THAT YOU WILL HAVE TO SET UP TIME&DATE)


1. Turn OFF cam
2. Remove the battery or the power supply
3. Turn the switch to CAMERA for about 30 sec
4. Turn the switch to OFF
5. Install the battery or power supply
6. Turn the switch to MEMORY
7. Open the LCD cover and press the RESET button ( small inner button )
8. You will be prompt to adjust date/time. Do it
9. Take some pictures

0helpful
1answer

Error message E 91 01

Hi!
The flash fuse on the main board or the flash board is bad. Contact your local Sony service center, but if they ask too much, you can contact me at [email protected] and I will give you a good price.
I work in Sony service center.

Tom
1helpful
1answer

I have a Sony-Cyber shot DSC-P72

It's a memory card error,You can try to take the memory out and retrieving them with your computer
1helpful
1answer

Flash symbol flahing with flashing number E9101 but does not flash only infer red light

Try this........

1. Turn OFF cam
2. Remove the battery or the power supply
3. Turn the switch to CAMERA for about 30 sec
4. Turn the switch to OFF
5. Install the battery or power supply
6. Turn the switch to MEMORY
7. Open the LCD cover and press the RESET button ( small inner button )
8. You will be prompt to adjust date/time. Do it
9. Take some pictures

Hope it will solve your problem....
0helpful
1answer

Sony T5 is flashing Error E91:01 and the pictures are blurry

My Sony cam was woring fine but suddenly it started giving an error E91:01 which is continuously flashing
39helpful
3answers

E:91:01 flashing and beeping few secounds after camera is turned on

e:91:01 is a flash error you might fix it by initializing the settings of the camera but there is no guaranty.

1.turn the unit on
2.press the menu button
3. select setup
4. inside setup and search for setup 1 (option with a toolbox icon with a number at the bottom.)
5. inside setup1, pls select initialize and reply with OK to evety prompt(using the center button)
6.if succesfull(you'll get clock settings)
7.set the date and time then try the camera again.

if this does not work.... call sony cust service 1800-222-7669
0helpful
1answer

Flash not working

If the settings was correct, force flash or autoflash, and while pressing shutter button halfway the flash indicator lit, and firing the shutter no flash(not firing). then flash assy is defective, and needs replacement. thanks
Not finding what you are looking for?

Open Questions:

0answers

Pentax IqZoom 700 film camera E9 error shutter failure Hi, I have a pentax iqzoom 700 that I'd like to repair myself but E9 appears on the lcd screen after inserting a new battery and powering on. Other posts mention this is a shutter failure. When turning on, the zoom lens extends and the outer shutter covering the outside of the lens opens. I've read tutorials that say you can sometimes fix a shutter error by causing a power outage during a shot and opening the battery door while taking a picture, but this isn't possible in my case because no shot is fired when the shutter is pressed, likely because the camera recognizes the shutter failure. I've also watched videos on how to repair leaf shutters and mechanical shutters, but the manual for this camera states the shutter is an AE between-the-lens shutter so I have no idea how to disassemble and fix this sort of thing. Looking thru the lens both thru the front of the camera and in the film compartment on the other side show a dark covering behind the lens even while the outer shutter is open covering the outer lens, which I'm assuming is the between-the-lens shutter. Ideally, I'd like to repair this myself, as there's nothing lost if I screw up and it's not worth it otherwise to take it for repair. I'm a complete novice with absolutely no prior knowledge of taking apart things, but I can follow directions so any suggestions or links to videos/tutorials would be very much appreciated Side note that I've searched the web extensively and have yet to find anything specific to repairing this camera model, and I'm not knowledgeable enough to adapt a tutorial for a different camera to this model Thanks in advance!

See all Sony Cyber-Shot DSC-P73 Digital Camera Questions

1,519 views

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Cindy Wells

Level 3 Expert

6449 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

388 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...